"Frostbyte II" still running warm

[_dV]

Suggestions

- Weigh the truck setup to run
- Do a run with the stock tires
- Do a run with the screws out of the motor

This should at least increase your understanding of whats going on in some way.

Originally Posted by _dV

Suggestions

- Weigh the truck setup to run
- Do a run with the stock tires
- Do a run with the screws out of the motor

This should at least increase your understanding of whats going on in some way.

Stock tires are long since thrown away

Don't have a weight scale

I suppose I could try removing screws, but dangit, I wanted to keep the dirt outa the motor

[reno911]

Originally Posted by Freezebyte

Stock tires are long since thrown away

Don't have a weight scale

I suppose I could try removing screws, but dangit, I wanted to keep the dirt outa the motor

Most of the motor mounts these days cover everyone of those holes, that isn't a reason for higher temps. Keep them plugged.

Gear down if anything.

[nitrostarter]

Originally Posted by Arct1k

Those temps are fine - ditch the OCD and enjoy it!

Originally Posted by reno911

Those temps are fine. Stop worrying Freeze and play with your damn toy.

Originally Posted by reno911

Most of the motor mounts these days cover everyone of those holes, that isn't a reason for higher temps. Keep them plugged.

Gear down if anything.

AMEN!! Go play with the truck! Its fine.

Get a CC blower if you are worried about motor temps....

[Finnster]

Originally Posted by Freezebyte

Stock tires are long since thrown away

Don't have a weight scale

I suppose I could try removing screws, but dangit, I wanted to keep the dirt outa the motor

The screws are not going to make a damn bit of diff either way in terms of temps. Better to keep it clean

[Semi Pro]

Originally Posted by Finnster

The screws are not going to make a damn bit of diff either way in terms of temps. Better to keep it clean

there is a block off plate that is suposed to keep people from damageing the windings just behind the end bell that would stop airflow even if he didnt have the screws in it

i see temps like that with the 2200 in my buggy on 5cell, you are fine