 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
n00b
Offline
Posts: 519
Join Date: Apr 2009
Location: The Netherlands
|
10.08.2010, 12:27 PM
The air version also should have a 5mm shaft according to the website:
17 Series Air Motor 1717-1500KV Brushless Air Motor ONLY $70.00 The 17 Series motors feature high quality oversized bearings, sintered Neodymium magnets, superior electromagnetic design, and rigorous engineering control in our own factory. The 1717-1500 has 2 flats milled on it. Flat to flat is 46mm. Off the flats the can diameter is 49.5mm. The 1717-1500 will work on the Align Trex 600 with motor mount mods (holes opened up for larger screws to fit holes in the motor). Shaft 5mm Diameter 2.0" (49.5mm) Height 3.4" (85mm) Wire Connector 6.5mm Shaft length from motor face 0.8" (21mm) |
 |
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Guest
Posts: n/a
|
10.08.2010, 01:59 PM
Got my 1520 that i ordered last Friday; no shipping notice, it just came
   .
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 93
Join Date: Aug 2008
|
10.08.2010, 02:22 PM
I had a total of 1717 Air version and all have the 6mm shaft and the car has 5 mm shaft. Just letting you guys know that it will be a problem for the pinion selection for the Air version. Just email them as they have an outstanding customer service team.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
|
KillaHurtz
Offline
Posts: 2,958
Join Date: Apr 2006
Location: Bucks Co, PA
|
10.08.2010, 03:44 PM
Quote:
|
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
