Toughest Buggy for $150-250

[reno911]

E-Raze

Had to replace servo and rx due to a little water skipping journey that goes unfinished until another day. So the wiring is not all done. I am going to place the rx behind the motor or on the mudguard. The second pic is the stock dif. I haven't had any problems since going to the hardened spiral diff ring and pinion gears.

[mac3194]

Originally Posted by reno911

E-Raze

Had to replace servo and rx due to a little water skipping journey that goes unfinished until another day. So the wiring is not all done. I am going to place the rx behind the motor or on the mudguard. The second pic is the stock dif. I haven't had any problems since going to the hardened spiral diff ring and pinion gears.

arer the hardened spiral diff ring and pinion gears sold by duratrax?? if not were can i get them??

[mac3194]

Originally Posted by reno911

E-Raze

Had to replace servo and rx due to a little water skipping journey that goes unfinished until another day. So the wiring is not all done. I am going to place the rx behind the motor or on the mudguard. The second pic is the stock dif. I haven't had any problems since going to the hardened spiral diff ring and pinion gears.

Hey RENO im gonna convet my raze instead of buying something new i will be running a MMM 2200 combo on 5s and an rcm motor mount is there anything i should upgrade now or stock up on??
Im gonna start this project as soon as i get my esc replaced from castle

Thanks for ur help