MaxAmps Race Edition Lipos

[E-Revonut]

Originally Posted by brandonwilcox

Couple of you guys said that you would be more impressed if s standard LiPo for an RC car was used and not a larger brick pack. Well Big Squid RC actually did this back in June with one of our packs and it cranked over the car right away with ease:

http://www.youtube.com/watch?v=KfaryxeCNsI

Brandon

Although starting s real vehicle does take alot of amps it is only for a second or two and then it can rest for minutes or hours before being needed again. In an RC car or truck we may not be seeing the 200+Amp peaks but we see an average of about 30 amps for 15 minutes with regular spikes in the 150Amp range. The battery is getting a good draw on it for the duration of a run, right to the cut off. Lets see a Max Amp pack take that abuse. My last MA pack that puffed was rated at 100A continuous 200A burst, I was getting bursts of 167A and an average over the run of between 25 and 30Amps.