 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
Guelph, Canada, eh!
Offline
Posts: 1,083
Join Date: Sep 2007
Location: Guelph, Ontario, Canada
|
12.14.2010, 11:29 AM
I measured the axle from pin to pin to be 136 mm. From the axle pin to the hole I made I measured 20 mm. I use a 2 mm aluminum shim behind the hexes to keep them away from the bearing. It's the shim that goes between the two bearings of the pinion in the LST diffs.
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
8th scale Stunt-Driver/Mechanic
Offline
Posts: 441
Join Date: Dec 2008
Location: SoCal
|
12.16.2010, 07:15 PM
Thank You Sir. I appreciate you taking the time to measure those for me...
Raja - FLM Ext. MM, 1512, 4s SC8ight - MMM, 1520, 6s D8T - MMM 1717 6s My OVERPOWERED Rides "CLICK" Like Playing Cards? Cut-Throat Rummy "CLICK" |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
