Questions about Castle repair kits

[Pdelcast]

Originally Posted by suicideneil

Fair enough then

I do have one gripe though; the fins on my 1518s have rather sharp edges where they've been machined to expose the bare metal underneath the green anodizing, not normally a problem unless you are sliding the motor on an emaxx mount ( to set the mesh ) and grip it a bit too tight- needs a light rub with a emery cloth or something just to take the edge off, so to speak.

Yeah, and the HPI grenade style motors (we call it "the lacerator") are even worse ... but they love it!

I'll talk to China about putting a .2mm round on the corners of the fins. I don't know how much more it will cost, but I'll ask.