The Nerd's Hyper

When I get around to it I will be order 2x2s and 2x3s, so I can bundle them as either 4s,5s or 6s. But most likely I will run 5s.

3s? That's very low for a 1/8th. Low kv, high voltage is much better for temps and amp draw. Now if only they made a 12s capable MMP

Kieren

[reno911]

I'm digging the move over, makes for lots of extra room. Puts more stress on the driveling though.

It is hard to say put that buggy looks hands down exactly like my Raze...

Ohs wells!

Cool build, look forward to the battery set up.

edit: Had a thought, will the lid still fit with the motor that far over... I know mine have low clearance on the sides.

I don't think it will add much more stress, the dogbones are well within their rotation angle limits. I was thinking of getting centre CVs if needed, but we'll see. As for the body, it will fit but I have to rotate the motor so the wires are out the side. I hadn't even thought of that before you mentioned it

Kieren