MaxAmps Race Edition Lipos

[JERRY2KONE]

Originally Posted by BIG-block

I think I should buy some generic cells from China. I will send my brother there who is a pilot and knows nothing about batteries in general. I will get him to buy the cheapest cells that they have and ship them back to me. Then I will put Holographic stereogram flames on the side of the pack with big bold TRUE 300C written on there two. Don't forget the sooper dooper 12awg wires and Deans connectors which will handle these kind of discharges with ease. Throw in a few more gimmicks such as waterproof and able to survive a nuclear holocaust (even though you wont). That ought to do it me thinks. Should be able to steal most of their customers from them and become filthy rich. If only I had no sense of morals or dignity and had no trouble stealing peoples hard earned.........

Ya know honestly if you did this and sponsored a table right next to the MA table at the next RCX I bet they would go absolutely crazy. Make your heat shrink wraps exactly the same only red, and do the TRUE 300C with the same exact graphics too, and tell them that you had some guy go to China and Singapore so he knows more than their guy does. Then put the Lipo pack into some kind of death ray gun and melt their faces off. That would be awsome man.

Originally Posted by JERRY2KONE

Ya know honestly if you did this and sponsored a table right next to the MA table at the next RCX I bet they would go absolutely crazy.

I daydreamed about this during the drive home, it's $1400 for a table for a weekend, it would be a laugh for sure.

[JERRY2KONE]

Yea that is a bit much for sure just to get a table for two or three days at an R/C promotion event. Gheeze what a ripoff. Yet another example of greed in our hobby.

But man wouldn't that be cool to set up a table next store to MA at one of these huge events, and have real graphs showing the difference between the MA cells and other manufacturers. Plus having open Lipo cells for the world to see just what MA are trying to sell to everyone for higher prices knowing all well that they are the same or inferior cells that some of the other suppliers are using. As stated most if not all of these Lipo cells are coming out of China. So how in the world can the cells MA is using be any better than anyone elses cells?

Then on top of that have some kind of test bench setup like they do at The Home Depot to compare drill batteries for overall power, peak performance, and longevity of a single charge. At the very least it would prove that MA cells are no better than any other cells. More than likely it would show that MA packs are poor in performance and not worth the extra $$$ that they are charging for their packs, unless you think that the cutesie $2 flame wrap is worth about $100.

Along with all of this I have yet to read one really good example of their advertised warranty that turned out in a positive manner. Not when you stack that against all of the bad stories we have read about Puffed and dead cells right out of the box or within the first one or two runs, and how they refuse to cover it. MA is obviously no better than any of the ripoff artists on Ebay who collect payment from people and then ship out boxes that are either empty or full of junk.

You know there is a problem when a company sells a product, and then has one of their own employees as a controlling entity on a national magazine that advertises their products. That is just a pure conflict of interest, and should be avoided. Anyone who believes that kind of BS needs to rethink their perspective. That would be no better than having lets say Ford rebadge a 4 cylinder Toyota, and then also have one of their Executives owning Road & Track magazine where they rave about this new 500hp product they have come out with. What MA is doing is no better than taking a Yugo, replacing the body with a look alike Corvette body and trying to sell it as an original Yugo high performance product. It really is pathetic when you examine the whole idea and compare what they have to offer over anyone else in the Lipo business. Its all smoke and mirrors.

[drw]

I( went to RCX show in Pomona,thast saturday,saw MA's booth,gotta tell you everytime i went by they were just sitting there,didn't appear they had many people inerested in their product.Great show thou CC and RC4WD had some great looking stuff on display

[JERRY2KONE]

Originally Posted by drw

I( went to RCX show in Pomona,thast saturday,saw MA's booth,gotta tell you everytime i went by they were just sitting there,didn't appear they had many people inerested in their product.Great show thou CC and RC4WD had some great looking stuff on display

Yea it is bound to happen when you are selling a product with lies on it. How long do you think people are going to look at that (TRUE 150C) on those Lipo packs and not realize that it is false advertising? Sooner or later the word will get around and they will be barely scraping by trying to figure out what went wrong. God takes care of his own. The Karma is going to get them one way or another. You should have walked over and asked for Jason, and told them that the word was out that they were selling some great waterproof flashlight batteries, and then walked away. Their day is soon approaching.

[lutach]

Like the members here, the folks at RCGroups didn't fall for the BS either :

http://www.rcgroups.com/forums/showthread.php?t=1434306

[whitrzac]

just thinking out loud here...


what is the resistance of Xin of 12g wire + deans plug?

if it is over .02 ohm, then any "claimed" rating over 500amps is lying...

7.4v x 500amps = .015 ohm