Custom Bits made from Bullet Proof polycarb material- See through!

[JERRY2KONE]

I have worked with a lot of different materials in my career, and have even had to install a few poly carmonite windows into a security space that were 1/2" or thicker. Sure if you fabricate something that is only like 1/16" or 1/8" thick you are more than likely going to get some kind of flex. If you fab something that is 1/2" thick out of this stuff flex is likely to be pretty much elliminated. The mere design of the standard bulkhead has flex elliminating features built into it. SO making the same item out of poly corbonite would likely leave zero flex to deal with. At that thickness this stuff is almost like steel.