ransoms robitronics br50 1/8 shortcourse brushless beast

[ransom]

did a reconfigure to fit twin battery holders to fit bigger 2 x 2s lipos
motor to front right centre diff swapped
servo remounted to left and stood upright
esc moved back slightly
46t spur fitted with 15 t pinion






stock tyres started unglueing so went to 1/8 buggy wheels
slightly lower profile and centre of gravity

this thing is tough flys well
will drift sideways down a straight and will roll and cartwheel without too much damage
i had read about the front hinge pin holders punching thru the plastic holders
and yes it happened so i fitted titanium savage hinge pins with circlips
and some washers and screws to keep them in place