Brushless EMaxx Spur gear question

[studysession]

What is everyone using after they strip their spur gear? My stripped on second run. I know the mesh was correct. This happens everytime I upgrade anything to brushless. I always have to either upgrade the differentials and stock spur gears to after market everything.

The Feigao 8L on 12 cells using the BK-Warrior 9918 Brushless ESC. Hads loads of power and very fun to run. Just stripped the spur.

[mmdooley]

You need a strobe slipper. It's a 1/8 setup. Mike has what you need if the strobe's came in. They have been on backorder. You will need a ONFA 51 tooth spur and the strobe setup. It's easy to put on. Good luck.

[infinite_loop]

If you can't wait for the strobes to come in, the Robinson Racing Double Disc Slipper Kits are a decent alternative.

I'm currently running that on a 9918/9L combo and it's worked fine.
Either way, stick with plastic spur gears...

[Sylvester]

Ive been running on 14-16 cells on a 10l and my spur is still fine.

[studysession]

Thanks - I want to stick with the 32p gears.

[Sylvester]

Yeah, just try to tighten it as hard as you can, set the mesh perfectly, and if it still strips than you need mod1 .

[mmdooley]

I agree with Sylvester the mod1's are the strongest for bl.