Hpi Pro 4 Bl

[mpetrich]

The Lehner Basic 5300 with the MGM (120 amp) controller is a great combo for a BL TC running a six cell pack or a 7.4v LiPo. The MGM 90 amp controller would be fine if you are only going to run up to the 7.4v LiPo.
Sometimes, just for speed runs, I will switch to a 9 cell GP2200 pack (which fits perfectly in the space for a 6 cell GP3300 pack).
It may cost a more than the Novak, but it works great.
Matt

[Thunderbruiser]

would a 2 or 3s be good for a 1920 5turn? and do you think it'll be faster than 4.5?

[Thunderbruiser]

money isn't really an issue i just want a good setup that will perform well on a 6 cell pack and not be too ballistic to handle lol

[captain harlock]

Then, the 4.5 might be too much for you.

[Thunderbruiser]

really i thought it'd be kinda slow of sorts lol i have driven some fast rides...I mean i want speed but i want to be able to drive normal

[captain harlock]

Hmmmm..it makes sense. Well, have a nice ride.

[Thunderbruiser]

i guess the 4.5 will be my best buy and i'll run a fan on the motor for even more cooling....and go from there...thanks for you help fellas i'll post pics once i get the car and install the sys. and what not

[ygguB naM]

The 4.5 isn't that fast, on a magazine test in a touring car, it only toped out at like 42mph.

[captain harlock]

ygguB naM....... I think I've spoken to you in the Team Associated B4 forum 2-3 years ago. You were the one who recommended me to use a 6 turn V2 motor to make my B4 go 50mph. Wow, that was sometime ago. Well I was able to push it beyond 50mph with a 480 brushless motor at 12volts. It was an exciting ride for sure.

[ygguB naM]

Originally Posted by captain harlock

ygguB naM....... I think I've spoken to you in the Team Associated B4 forum 2-3 years ago. You were the one who recommended me to use a 6 turn V2 motor to make my B4 go 50mph. Wow, that was sometime ago. Well I was able to push it beyond 50mph with a 480 brushless motor at 12volts. It was an exciting ride for sure.

How fast did it go on the 6t?

[captain harlock]

Originally Posted by ygguB naM

How fast did it go on the 6t?

I did not even get it. I directly went to the Kontronik motors by chance.:027:

[Thunderbruiser]

yeah my friend was saying it wasn't that fast...well i just purchased two 2sp 8000mah li poly's from max amps so that opens some doors up i guess cause i know they have way more out put than what i normally use.....so what about that 380c 6 that everyone was talking about?

[Thunderbruiser]

would a quark 80 amp controller be able to handle a 3s 8000 mah pack and say a lehner 5300?

[captain harlock]

Eeeaaaasilllllyyyyy.

[Thunderbruiser]

currently using the sys from my rustler due to my rustler being broke and awaiting some parts