E-Maxx Help

[coolhandcountry]

Nice truck.
I was noticing you still have the stock diffs.
If you go with alot of power the diffs will fail.
If you want speed and runtime you need more voltage.
I you go 6s lipo on a 9xl or 10xl with 3800 or so mah.
You will be able to meet your goal or be extemely close.
As for the single speed. I like the two for a bashing setup.

[sjcrss]

I agree with everyone...you definately need to upgrade the diffs...to atleast the UE 6 spyder, but for a few bucks more you can get the 8 spyder setup, with has the aluminum diff cup over the 6's plastic cup...if these diffs are setup correctly , you will be set..also you need to lose the aluminum bumper mounts..and put stock on there...you need a give point ( or flex point)...at the speeds you want to run..if you hit something....that will transfers the damage elsewhere....bumper mounts are cheap and easy to replace. Also get a steel idler if not a set of the Ultramaxxed tranny gears, which are hard to find, but once in awhile you can find them....