UBEC Smoking

[neweuser]

Well, the reason i asked is because when i wired my switch in the last time, i think i had a bad connection after that. I cured everything by replacing the switch, ubec, and redid my connections all over. And now i can go far away and it's smooth runnin. But i took my time on everything and double, then triple checked everything again! Yanked and pulled and inspected each solder joint. I would say some thing with yours is wired wrong, or bad connection somewhere. UBEC are finiky it seems. Oh, and i took it off my chassis all together! I mounted it on the side of my receiver box.