80b shutting down ?

[squeeforever]

I think there 4mm but I'm not sure to be honest.

[stampy]

i think your right they are 4mm lame:002: what about a lenher xl 3600 would one work in a rusty? a new motor is a must now! :035: dont know what happend but i know its bad

[BrianG]

Um, that motor doesn't look too healthy to me...

[jhautz]

Originally Posted by stampy

i think your right they are 4mm lame:002: what about a lenher xl 3600 would one work in a rusty? a new motor is a must now! :035: dont know what happend but i know its bad

The XL3100 would be great in a rusty. I ran a XL4200 for a while and it was really good. But I went to 3s Lipo and needed to get a lower KV motor.

You could even just run the Basic 3100 (not XL) and it would be really good.

[stampy]

nvm its 97 amps:031: any body know how powerfull a Kontronik Twist 42 is? jamie from starluck said he would sell me one for like 140 should i do it:002:

[jhautz]

4200kv seems like it would be too much for 11.1. You will be reving it really high and it will probbly run hot. I got rid of my XL4200 cuz it ran to hot on 3s. I would recomend going for something more in the 3000-3500kv range. You can gear ir up and get just as much speed, it just runss cooler. Especially if you go w/ the basic XL. It will have plenty of torque to gear it up.

I really think the Basic 3100 would be ideal for a rusty on 3s.