Quote:
|
Originally Posted by BrianG
Newe: If you already have resistors on there, it's probably enough. You generallay want to draw about 1A or a tad more. Just be sure you size them appropriately to take the heat!
Well, now that I know the LBA10 will balance the M1's OK, I really don't need another balancer. Whatever charger I get will have a high cell count capability (10s), high current charge (~10A), able to have an adjustable peak v (for any future chemistries), and higher power limit (preferably about 400w).
|
I would love to send you a pic of the inside, i know there are adjusters (2 I believe) but my camera sucks at close ups. Anywho, my resistors are about a 1/2 inch apart and right under the fan on the PS. So I think they are ok. If I add one to another set of 5v lines, would that hurt anything?
The 989 can do 10s and has the 10amp PS, I know that it's not adjustable though. You are looking for an adjustable PS?
Threaded Mode
