BL Motor Evaluation program

[GriffinRU]

Does anybody knows no load current for Novak motors?

And what is going on with SS5800 and SS4300 old and new generation, they have different kv numbers. NOVAK put motors spec on their web but forgot to put the most important parameters :)

NOVAK is weird with their specs, they do not make sense.

Very nice program. Thank you.

One issue I had running it. When I run it on a laptop with a 17 inch, 1920x1200 display with the font set to 120dpi the numbers on the right hand side are all too big for their boxes and get cropped off...can't see them. It probably works fine when using a Windows default 96dpi. You might want to increase the size of the boxes on the right so it works with higher dpis.

[GriffinRU]

Originally Posted by Disaster

Very nice program. Thank you.

One issue I had running it. When I run it on a laptop with a 17 inch, 1920x1200 display with the font set to 120dpi the numbers on the right hand side are all too big for their boxes and get cropped off...can't see them. It probably works fine when using a Windows default 96dpi. You might want to increase the size of the boxes on the right so it works with higher dpis.

Thank you for feedback, I will check this, and correct this behavior.