converting a XB8 to brushless

[glassdoctor]

Yep... I had to put new holes in the chassis. You should see how many holes are in the 777 chassis.... I did two different layouts on the same car, lol. But it works great...

If you move the diff over a bit to center it up the driveshafts will be fine. I need to modify mine though when I moved the diff forward. i used a truggy piece for the rear driveshaft. It was a hotbodies lightning stadium rear axles I think.... longest one I could find. Then I shortened the front dogbone to the correct length, homemade syle :)