Stampede brushless help.

[jnev]

Yep, the Mamba Max is the way to go. I think you will be happy with the 4600 or 5700. The 4600 may be a little slow for you, but the run times will be insane, so you may want to go for the 5700 which wil be a mix of both.

As for gearing this is what someone else wrote, would work great on a pede:

the sweet spot in a flm pede is 83/15 on 6 and 8 cells

Although yours isn't all aluminum, you can still start here and then change the gearing accordingly.

[nastety92]

Thanks for the replies guys, I really appreciate the info. I'm sure I will be very happy with the MM 5700 system, thanks again.

Nick

[nastety92]

I ordered the MM 5700 and steel idler gear today from Mike. Where can I buy the 83/15 new gears and what kind should I get?

Thanks again for all of the help.

Nick

Originally Posted by nastety92

I ordered the MM 5700 and steel idler gear today from Mike. Where can I buy the 83/15 new gears and what kind should I get?

Thanks again for all of the help.

Nick

nasty,
don't know if you have and older pede or new. But if it's the old style with the slipper peg clutch, I suggest you go on with the conversion to the updated revo pad-style clutch. This effects which spur you buy. It is absolutely worth it.
And if you can, I suggest at least a 7-cell hump over a 6.
Good luck.....

[nastety92]

Originally Posted by cadima

nasty,
don't know if you have and older pede or new. But if it's the old style with the slipper peg clutch, I suggest you go on with the conversion to the updated revo pad-style clutch. This effects which spur you buy. It is absolutely worth it.
And if you can, I suggest at least a 7-cell hump over a 6.
Good luck.....

That sounds like a good upgrade, can I buy these parts all together or do I need to piece them together. Any links available? I have an older Pede.

Thank you all again for the help.

Nick