Stock E-Maxx with modiified Slipperential transmission

[GriffinRU]

Originally Posted by GorillaMaxx360

so everything needed for it to work(basically just mike slipperential but a different motor mount) also the motor mount is machined right because in the picture it looks molded kind of

_also will it work with all size motors like the neu and feiago motors

Printscreen from CAD drawing, actual part - machined from aluminum.
Any 540-size motor with can diameter 35.8mm will fit. So, any Novak, Feigao 540 and smaller, LMT 19-series and smaller.
NeuMotors 15-series won't fit (with 18t pinion) because motors diameter 39.5mm.

I will check for possible motor and pinion combos later.

[GorillaMaxx360]

is there anyway using a smaller or bigger pinion i could be a neu 1515 motor to fit. and if not will you be making a different version to accomidate these motors or can you motify the current version to allow these motors to work.

[GriffinRU]

Originally Posted by GorillaMaxx360

is there anyway using a smaller or bigger pinion i could be a neu 1515 motor to fit. and if not will you be making a different version to accomidate these motors or can you motify the current version to allow these motors to work.

Neu 1515 will work with current adapter using pinion 22t and Up.
I will work on utilization of smaller pinions later.