How many MMM's work and how many dont?

[hoovhartid]

1 V1 died
1 V2 flammed

How many MMM's work and how many dont?
i'd like to keep a tally if at all possible...

[wade7575]

I don't think that's going to be very easy,first off you would need to find out from castle how many there selling and sending out for replacement then contact everyone because I'm sure most people tht own them don't all belong to rcmonster or the Traxxas forum.I would just start a thread and whenever a person post's about there MMM went south and you see it PM them and ask them how it died and then edit your post and just keep adding the new numbers as the add up.

[jayjay283]

I honestly feel bad for you guys whos V2s are smoking or catching fire. Mine came to me before Patrick even knew they were shipping,my original connectors were clipped off my V1 and all of it mailed back to me. I just got back from my nightly sunset drive to roll over hour #26 on the V2 hourmeter. I swap between 3 motors on it and change the gearing constantly and drive on 4s,5s and 6s and it just keeps going, Motor was 128 (2d) 26/62 and V2s fan goes on now and then but never for long after I stop to take temps, and I havent modded 1 thing on it. I wonder where it went wrong.. Sabotage I say !! Check the emplyees backgrounds

My guess is that most are breaking. How bout the poor guy with 4 v.2 that broke.

[jayjay283]

I want those of you who are blowing them up geared for 75mph on a 1.5d running 15c 6s in a 12lb monster truck to get a MGM and see if the V2 is the problem or your setup is

Originally Posted by jayjay283

I want those of you who are blowing them up geared for 75mph on a 1.5d running 15c 6s in a 12lb monster truck to get a MGM and see if the V2 is the problem or your setup is

I've flame my MGM 16018 on my 10lbs e-revo with a 1515 2.5d geared for 37 m/h.

So MGM are probably not better than CC, the only difference is here on this forum, they have about 2% of guys who ran MGM and all other run MMM.

So they've les chance to ear about guys how flame MGM, but the risk is there.

I've tell it, THEY HAVE NO RELIABLE 6S CONTROLLER ON THIS F... PLANET

[e-mike]

[magman]

Originally Posted by david lamontagn

I've flame my MGM 16018 on my 10lbs e-revo with a 1515 2.5d geared for 37 m/h.

So MGM are probably not better than CC, the only difference is here on this forum, they have about 2% of guys who ran MGM and all other run MMM.

So they've les chance to ear about guys how flame MGM, but the risk is there.

I've tell it, THEY HAVE NO RELIABLE 6S CONTROLLER ON THIS F... PLANET

You are probably right David!

[e-mike]

lets see what castle should do or repply this week

Originally Posted by e-mike

lets see what castle should do or repply this week

[BrianG]

Originally Posted by david lamontagn

I've tell it, THEY HAVE NO RELIABLE 6S CONTROLLER ON THIS F... PLANET

Probably should edit that and state "car controller". There are plenty of ESCs out there that will do well over 6s.

Originally Posted by BrianG

Probably should edit that and state "car controller". There are plenty of ESCs out there that will do well over 6s.

Yes, maybe you're right, but 99% of the guys here run truck

[jayjay283]

I feel ya David, I do..

v.1 still work on my red anodized maxx with 4s and 6s(4000mah), feigao 9XL-8XL

Wade7575 I cant believe god didnt delete your post shame on you...that was a funny joke though. Heres one..... How do you bullet proof your mmm? By throwing away your transmitter! PS the mgm 120.32 esc is a reliable 6s control.