Gott screwed on the 9920....

[nbcaznmaster]

did he set up the battery connectors right? I plugged the batts in and nothing happened. waited for 30 seconds and no beep.

[Gustav]

Yes,that looks right.

[stampy]

you have the bec jumper in right cause if its not programed and the bec jumper is removed it wont do anything

[Gustav]

Do you have your transmitter on and did you read the sticky?

[Serum]

it doesn't beep with the programmer button on..

Here, do you reading;

http://www.rc-monster.com/forum/atta...=&postid=21655

ncabz, with all respect; You are begging for a controller for so long, and every single person on this forum told you not to buy it second hand, or pay very close attention to the seller.. just to invest a few bucks more (i know it is hard cash, but if you did your saving and showed some patience, you could have had a new set from Mike) You are a person who needs to learn the hard way. I do feel sorry for you though, i wished i could help you out with this, but it's just something i wanted to share with you.

PLease keep your peace, i know you don't want to hear the 'we told you so' part, we are also willing to help you out.. PLease keep your peace..

[nbcaznmaster]

i got it runnign! works great. though the motor was dissapoiintment. How do u know if u have a ubec? Is it a square thing on teh wires? I dont think i got one. Should i buy one or stick with receier packs?

[MetalMan]

Originally posted by nbcaznmaster
heres a pic of the motor.

Those motors are actually Nemesis motors that Fine Design RC stuck that ugly sticker on. It wasn't the fault of anyone but Fine Design RC.

UBECs are external devices. You would notice it if you had one, as they are white and about 1 1/2 x 1 1/2 inches or so. You can buy one, or use a RX pack. It's your choice.

[Gustav]

You would know if you had a ubec if you'd bought one and had a big white thing soldered to your battery wires.;)

You need to remove the black jumper(behind the red one and in a bit) if you want to use a reciever pack or ubec (the big white thing with Koolflight UBEC written on it)otherwise you'll be using the controllers BEC.Please don't use an external bec or reciever pack without removing the black jumper or this damn saga is never going to end.:L:

Read the ####ing sticky! for God's sake.

I can't believe you spent all that time finding a used system without giving a moments thought to the conversion or anything else.You could have had it all ready,including how to program the controller.

[nbcaznmaster]

i did read teh sticky! it works fine now! well, everythign is ready except tthem aluminum parts. Dad aint helping much so getting aluminum parts is hard since i aint got no car.

[MetalMan]

I don't either ;). That's what the internet is for :).

[Gustav]

I got a metre of 1/4" angle HE30 delivered this morning.That should keep me in motor mounts for a while.Got lots of 7075 too.

[mmdooley]

Hey yall, I got my hybrids and arms and towers in today. That should keep me busy for a little while. I have some pictures of my E-MAXX while it is still stock and I want to post them but I dont know how. Can someone help me out?
Thanks:)

[Gustav]

Yeah,in the post/reply page,near the bottom it says attach file,click 'browse' and chose the file you want to attach from your computer and it'll attach it to your post.

[mmdooley]

I am trying it now.Thanks. IT says my picture is to big and gess what, I don't know how to do that eather. :C:

[Gustav]

I don't either so i take pics with the e-mail file size on my camera and they fit nicely into posts.Just retake them in a smaller file size on your camera if you can.