What about this charger + power supply combo?

[BrianG]

Some PC supplies can be made to boost the output to the 13-14v range, but no way to tell until you open it up and do some digging. And only 12v should be needed, but 13-14v gives the output a little more leeway for voltage sag under load, and a higher voltage requires less current for a given power output.

[SpeedAssault]

Originally Posted by Byte

And this power supply: http://www.hobbycity.com/hobbycity/s...idProduct=8592
I will use my LBA10 to balance the cells. Will all these 3 things work good together? Does anybody got experience with this charger and/or power supply?

Thanks,

Patrick

The power supply is From HOng Kong
No way I'm buying from them !
Look For USA made

[What's_nitro?]

http://powerflow-usa.com/power_suppl...r_supplies.htm

I have the 45A model. It's way more than I need, the 30A would be plenty for most.

[SpeedAssault]

jessh that's overkill in amps and price for me.
I took apart an Ol Pro-tech nicad charger thinking I could use the transformer as I gave My Nephew my Astro flight Nimh DC charger

Here is a great Size and price for 8.5 amps $30. http://www.hobbypeople.net/gallery/158300.asp

20 amp model $53.-$82. http://www.hobbypeople.net/gallery/158301.asp

http://www.rcgroups.com/forums/showthread.php?t=1051873

42amps for $50, 500+watts.

Can put two together and have 42a at 24v. This was something linc posted. Got mine last week....

[_paralyzed_]

Originally Posted by Duster_360

http://www.rcgroups.com/forums/showthread.php?t=1051873

42amps for $50, 500+watts.

Can put two together and have 42a at 24v. This was something linc posted. Got mine last week....

that's the one to get. discussion over!