Plettenberg Powered Revo

[Serum]

Well Daniel;

My emaildoor is wide open for you.. ;)

[Dafni]

...and so is mine ;)

[|2evo /\/\an]

Compliantguy, what size do you have on the motorshaft? also, would you like to sell a motor mount or is it easy to make one? coild you please take on pic on it..

Thanks
Max

[Dafni]

Hi 2evo, welcome to the forum!

Motor mounts can easily be made out of angled aluminium. A drill is all you need, basically.

2evo,

The motor shaft is 5mm. And, I have considered selling the motor mount, battery trays and mounting hardware. PM me and we'll work out something. Also, I have almost 8 feet of the 6063-T5 2" x 2" x 0.1875" aluminum angle, if you need extra material.

[|2evo /\/\an]

woah, thanks! i only want the engine mount, not the battery trays, so how much do you want for one shipped? if needs to be able to fit on a Fiegao 9L if you can.

[Dafni]

The way I see it, you can mount any motor to Compliants plate. Well, anything with the popular 540 can, actually. Most motors use the same "footprint".

[|2evo /\/\an]

how did you secure the controller? double-sided tape?

[Dafni]

Double sided tape should work. Velcro too.
I always use Velcro plus zip-ties.

[|2evo /\/\an]

whats velcro? i think i'll just use zip-ties^^
well, i cant seem to get a cheap controller(i wont have money to a new one before cristmas, LOL) anyone selling a 9918 or 9920?

[Dafni]

Velcro: Don't know the swedish word, but look at the Gorilla Maxx Batterie straps for reference.
http://www.rc-monster.com/proddetail...4-ST-BK&cat=11
You van get this stuff self-adhesive, very handy.

Like I said before, it's hard to find a used Warrior. (you could still sell your .26 and all the nitro junk :p just kiddin')

[|2evo /\/\an]

lol, i just got my .26, havent run 1 gallon yet=P

well, someone gotta have one!

oh, and that velcro, now i know what it is!

[|2evo /\/\an]

oh, the swedish word is kardborr
wierd, ey?

I used self-adhesive heavy duty velcro to attach the speed control. I flipped the truck over several times and the speed control never came loose.

How does $20.00 sound, plus shipping? Where would I be shipping the motor mount to?

[Dafni]

2evo, with compliant's kit you would not even need a spare chassis-plate, if you want to switch from BL to nitro and back again. Correct, Compliantguy? I think you haven't done other mods to your chassis but a hole or two, right?