The Purple chassis has a 1521 in it------- never ran it in that car........
But , the gearing-------- that's pretty much all you gotta do, switch the pinon with the spur--------LOL
Seriously--------- of coarse, there's a little more to it than that...
thanks mate i was thinking about it but i don't really want to change it too much because 99% of its life is going to be flying off ramps lol but Chris mentioned about the open class but im never going to be able to compete against the guys with more engines. i could change the gearing but i don't know much about that so i will probably have to keep bugging Chris lol
Hong Nor CR Pro Buggy With Cabbie ported Falcon .28, 22t Bell, Ceramic Clutch Bearings and Centre and Front Torsen Diff 74.6mph Click Me
Savage SS 4.6 Ultimate Basher Pics and Spec
that sounds allot more doable lol, im meeting up with Chris soon so i might see what he thinks i can do without without making any extra holes in the chassis lol :)
Hong Nor CR Pro Buggy With Cabbie ported Falcon .28, 22t Bell, Ceramic Clutch Bearings and Centre and Front Torsen Diff 74.6mph Click Me
Savage SS 4.6 Ultimate Basher Pics and Spec
lutach
Thanks for pointing out the 1/4 scale ---------- I'll get on that --- do you know anyone that will run 1/4 scale?
The bikes are set.
If you have the desire to run more than 2s------ Electric open is the class to run.
N
The Electric Open seems to be related to cars. A Electric Bike Open would be a nice choice as well, just incase some crazy guy shows up with some insane monster bike.
We can look at the bike class but the restriction is to ensure a level playing field for this class. If you want to run a bike with 3 x .28 engines or a Neu 2215 motor running 12 lipo cells then you can enter the open classes. With only 2 wheels you might have an advantage over the cars
Last edited by ziggy12345; 08.03.2008 at 02:43 AM.