RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#31)
rcjmaxx
RC-Monster Carbon Fiber
 
Offline
Posts: 150
Join Date: Dec 2004
Location: Fla
10.19.2005, 03:00 PM

Quote:
Originally posted by Papa
Thanks for the answers it sounds nice. I take it you make 5 minutes no problem. At our track I will have to do 10 minute mains with the Nitro Monsters, I am thinking I am gonna need the 2s2p scorpions @6400Mah.
I'm running ta pair of Scorpion 6400s in my TXT-1 and getting 25-30 minutes with bashing and top speed runing.I've got a 10L/9918 combo an Emaxx tranny locked in second gear.You should have no problem outlasting the nitro crowd.
   
Reply With Quote
Old
  (#32)
Papa
RC-Monster Aluminum
 
Papa's Avatar
 
Offline
Posts: 568
Join Date: Aug 2005
Location: Cleveland OH
10.19.2005, 03:05 PM

Cool, good loooooong run times. I have a lehner 1940/6 w/9918, Gmaxx single speed, strobe slipper,and UE VBS. I am psyched to finally run this thing.:cool: Just a few more pennies and I'll be ordering them up.
   
Reply With Quote
Old
  (#33)
RC-Monster Mike
Site Owner
 
RC-Monster Mike's Avatar
 
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
10.20.2005, 05:13 AM

I have a pair of the 6400 mah scorpions myself, but haven't gotten the chance to test them on the track lately due to the weather. i plan on racing this weekend with MacII, though, so it should be a good time. I will probably use a 1930/8 motor with the 4s Lipo packs(1940/7 maybe, depending on if I can get the gearing where I need it).
   
Reply With Quote
Old
  (#34)
Basketti
Guest
 
Posts: n/a
10.20.2005, 06:17 AM

http://www2.towerhobbies.com/cgi-bin...?&I=LXKLK8&P=7

Thats the one aye? whats with all the plugs? do you just use the deans plug and leave the rest?

for the price of two of those you could get 5 pairs of 7 cell ib3800's, and 5 pairs of ib3800's would last longer than those packs, but for racing they would be good cause they have long run times so you wouldnt need to pit in. but i'll just stick with normal batteries, i only bash.

Last edited by Basketti; 10.20.2005 at 06:18 AM.
   
Reply With Quote
Old
  (#35)
Electric Dave
Guest
 
Posts: n/a
10.20.2005, 08:18 AM

Quote:
Originally posted by Basketti
Thats the one aye? whats with all the plugs? do you just use the deans plug and leave the rest?
The Deans lead is your power plug, that goes into your speedo. The White plug which kind of looks like a Tamiya Plug (but is not) is used only for charging, you plug it into the charger. The two radio plugs go between the speedo and reciever for a sinlge battey setup or see my diagram (2nd post of this thread) for a dual battery setup.
   
Reply With Quote
Old
  (#36)
Serum
RC-Monster Admin
 
Serum's Avatar
 
Offline
Posts: 10,480
Join Date: Feb 2005
10.20.2005, 04:31 PM

that is an error on the towers site, they are no 60A, but 120A continiously...

crap.. 14.8X120=a rough 1800 watts.. that should do the truck Mike..
   
Reply With Quote
Old
  (#37)
Papa
RC-Monster Aluminum
 
Papa's Avatar
 
Offline
Posts: 568
Join Date: Aug 2005
Location: Cleveland OH
10.20.2005, 04:34 PM

So do you think the performance of these packs will be up to par?
   
Reply With Quote
Old
  (#38)
Serum
RC-Monster Admin
 
Serum's Avatar
 
Offline
Posts: 10,480
Join Date: Feb 2005
10.20.2005, 04:50 PM

No doubt.

Rule no1 with BL the maxx power the motor can deliver is the power that the batteries can deliver minus the losses..

a normal 18 pack (good cells) are able to pop out 1800 watts as well, though the 18cell packs weight more... and it seems that lipoly's are the best when it comes to HUGE current peaks..
   
Reply With Quote
Old
  (#39)
starscream
RC-Monster TQ
 
starscream's Avatar
 
Offline
Posts: 703
Join Date: Mar 2005
10.20.2005, 09:51 PM

Thanks for the info MacII,

I've been waiting to get Kokam Lipo's for a looooong time...

I've been keeping an eye on FMA's site for prices on the skyvolt packs. I went there yesterday and saw that they have dropped thier prices around 15-20% on most of thier new stuff like the skyvolts and scorpians etc.

So, I went a little crazy and spent $500 on a 6s charger, 5s skyvolt pack, both the charge protection and discharge protection modules, the DPM Led/speaker and the charger extension. Now I remember I needed to get the Impads for my pack and a power supply...

The reason I didn't get the scorpians is that they only come in 1p2s packs. I did not want to settle for sets of 2s so I went with the skyvolts. The cells are the same so they should perform just as well.

I will have to start another thread when I have data on my setup and performance.

Due to the lower internal resistance of the Lipo packs, they should get better runtimes then a comparable mah nimh pack.

I run against the nitro's as well and have to last through a 12-15 min A main. My GP3300's could easily last through a 15 minute main so I'm certain the Kokams can handle it.

Thanks again for the info.


Ha Ha
The Flashlight Strikes Again...
   
Reply With Quote
Old
  (#40)
Electric Dave
Guest
 
Posts: n/a
10.20.2005, 10:32 PM

Quote:
Originally posted by starscream
I will have to start another thread when I have data on my setup and performance....Thanks again for the info.
Please do start a new thread about your experiences too. I think my favorite part of this hobby is the sharing we all do. What works, what doesn't how we can make our race days (and bash days too) just a little more fun and rewarding. Keep fighting the good fight against the Nitro trucks.
   
Reply With Quote
Old
  (#41)
MetalMan
RC-Monster Mod
 
MetalMan's Avatar
 
Offline
Posts: 5,297
Join Date: Mar 2005
Location: SoCal
10.20.2005, 11:35 PM

$500! That's a lot! Now only if I could get that kind of money to spend (LOL).


SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz
   
Reply With Quote
Old
  (#42)
gixxer
RC-Monster Titanium
 
gixxer's Avatar
 
Offline
Posts: 1,150
Join Date: Jan 2005
Location: wolcott ct
10.20.2005, 11:50 PM

looks good dave. I remember you won the points series that was the last time I went up there with little dan. Just thought Mike and Dave would of been putting up a better fight since then.
anyways glad you are enjoying your new lipos, I have been running ones since last season and dont plan on ever going back.


Kyosho SC, tekin rs, D3 17.5
Hyper 9e, mmp,tekin 1900kv
Associated sc10 4x4, novak 4.5
   
Reply With Quote
Old
  (#43)
Electric Dave
Guest
 
Posts: n/a
10.21.2005, 10:03 AM

Quote:
Originally posted by gixxer
looks good dave. I remember you won the points series that was the last time I went up there with little dan. Just thought Mike and Dave would of been putting up a better fight since then.
anyways glad you are enjoying your new lipos, I have been running ones since last season and dont plan on ever going back.
Yeah, I've had some kind of strange luck this season. Stared with the first race and then it just continued all season. I think my luck may be running out, but we still have a few weeks of racing to go so I'm going to try and hold it together. I can't see going back to standard cells either. Obviously its cool this time of year, so I can't gauge how much cool down the LiPos will need between rounds but I pulled them out last week already cool. It was windy and about 60 degrees out so we will have to see how they do with 90+ and humidity next year.
   
Reply With Quote
Old
  (#44)
Papa
RC-Monster Aluminum
 
Papa's Avatar
 
Offline
Posts: 568
Join Date: Aug 2005
Location: Cleveland OH
10.21.2005, 11:36 AM

It sounds like the temp of the packs is not a big deal. I want to wrap them in IMPAD and have been hesitant on account of rising temps. What do you think?
   
Reply With Quote
Old
  (#45)
Electric Dave
Guest
 
Posts: n/a
10.21.2005, 11:41 AM

Quote:
Originally posted by Papa
It sounds like the temp of the packs is not a big deal. I want to wrap them in IMPAD and have been hesitant on account of rising temps. What do you think?
Like I said above, I've only used them once (Sunday) and it was cold and windy...upper 50's low 60's...I ran them for my Qual round and they felt slightly above air temp. I let them sit and by the time i was done corner martialling for the next race, I think they were cool enough. Time will tell on this however. I need more runs and varied ambient temps to tell. They did strike me as being cooler than my regular old packs were after a full 5 min run.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com