Hyper 7 Brushless conversion

[eovnu87435ds]

and to make it even nicer, LEDs! I have a white one out the front, a red one out the back, and 4 green ones inside the body! sorry for the bad pic quality, but gif's suck as a picture format... The LED's are glued in nice and the wires are all tucked out of the way, but the power system ads a bit of extra weight... I have glued in my hyper a 9v battery and 2.4v NiCd to power the lights

[trev3813]

Very nice

[rawfuls]

Hehe, that'd be MY LIGHT KIT :)

Nice Hyper 7 ;)

[Takedown]

I heard one of your cells on your pack took a dump. What pack do you plan on saving for?

[eovnu87435ds]

well, I'm about to contact linc to have him pull out the cell, then i will have a 4s pack, and then i will put the other cell, which still works on my nintendo DS! ontop of that, My birthday is the 8th, and I got 2 of the RC-M 2s lipos in the mail now. ive seen them run in ben's god ruggy and they are amazing!

[Takedown]

Originally Posted by eovnu87435ds

well, I'm about to contact linc to have him pull out the cell, then i will have a 4s pack, and then i will put the other cell, which still works on my nintendo DS!

Hmm, I dont see it being able to fit in the case of the ds w/o some good ole duct tape.

[rawfuls]

Wait wait wait, if.. a pack takes a dump, does it make another lipo? A smelly one perhaps? What if you put two packs together, do you get a mini cell?

Something you'd expect out of linc, I know.

Looks like I beat you linc.

[Takedown]

Haha...

[eovnu87435ds]

well, the pack is still holding voltage, although it is vented and smelly. and of course nothing can be complete without some ducttape! i was going to probaby make a small lexan casing for it, and tape it to the bottom of the DS with leads soldered to the battery port of the DS, and deans so I can use my lipo charger... although, since im just replacing one lithium battery with another, and they are both 1 cell, 3.7v couldnt I charge via the DS/ac adapter? it might take a while, but hey, when you have 20+ hours of runtime...

In other news, today is my birthday! I got my RC-M 2s2p hardcase lipos today, with a nice harness made up! They are amazing! only thing I have to criticize is that unlike shown in the picture and description, only one end of my wires had bullets on only one end instead of both. I'm glad i got these because I almost killed the rest of my pro tek lipo! Little did I know that with a 13t pinion and 46t spur, in my car, it went from a top speed of 43 to 69 mph, pulling 126 amps constantly... And here I am running the 20c(80 amp cont.) in my car, with full throttle 95% of the time for the entire run... the lipo didnt cool down for 2 hours, but suprisingly, all the cells survived! Also, My fake badlands came here today! which is also good because running the hyper overgeared turned my Jamin shredders into slicks in a single run! Now all I have to wait for is my mmm combo(ordered 12/8/08) that is my xmas present, my proline revolver v3's, and my new lipo charger!


The bald shredders


the tread style


on my buggy

[brushlessboy16]

Damn those tires are skinny! Looks good though :)

[trev3813]

Deep lugs, lots of traction!

[Takedown]

Looks good.

[BL_RV0]

Bitchin. Reminds me of my old mugen.

[Takedown]

What ever happened to that thing?

[sleebus.jones]

Those knock-off badlands are, in a word, AWESOME. I've been beating the heck out of mine (with 6S) on concrete, asphalt, dirt, whatever and they wear great. You'll love 'em.