Hacker C50 Maxx - RC-Monster Forums

Takedown · **Hacker C50 Maxx -** 05.16.2008, 08:38 AM

Theirs a new one at my LHS that is being sold for $50. I plan to go and pick it up this weekend sometime. I plan to run it on 5s and not 4s which is the limit. I think it'll be fine.

brushlessboy16 · 05.16.2008, 08:47 AM

How many rpm is it turning on 5s?

Arct1k · 05.16.2008, 08:48 AM

What is the name of the shop - Will they ship - Just kidding but that is a steal - get down there quick... Just have to watch the shaft as I recall it is 1/8th... Rgds

glassdoctor · 09:02 AM

Kv on the standard "C50 Maxx" is 3033

I would not recommend 5s unless it's in a (relatively) light vehicle with suitable gearing for the +50000rpm it will spin. Mine ran hot in my racing emaxx with 12 cell nimh, back in the day. Around the 180-190 range after a good 5 min run in the summer.

I'm interested though to see how it does for you.

brushlessboy16 · 05.16.2008, 09:02 AM

No offense, i understand what u get for the price, but why not just get the motor with the right specs.. its not worth 50 bux if its blown up

BL_RV0 · 05.16.2008, 09:41 AM

I'd assume it's going into his Cen Matrix truggy. From what he has told me, a velineon motor does not even have heat problems in that thing, so I'd assume it's pretty dang light.

lincpimp · 05.16.2008, 10:38 AM

The c50 maxx is a good 4s motor, not sure if I would try 5s, but at 50 bucks it is not too expensive. Do not use this motor without a slipper, as the 1/8" shaft will break. I broke one shaft in my hyper7. The shafts are hardened, and quite brittle, I even tried to weld another piece back on and have it machined, but that did not work either. Tekno sells a 5mm upgrade shaft for $75, that plus the $50 makes $125, still a good deal for that motor.

lutach · 05.16.2008, 11:13 AM

How many C50s does your LHS have?

Takedown · 05.16.2008, 02:13 PM

Only one lutach, :) I know I could not beleive what he wants for it either. I plan to go pick it up this weekend. Ill let you guys know. I might run it in the metrix but im doubting it. Linc Ill take a look into that upgrade. Still sounds like a great deal!

Takedown · 05.16.2008, 02:19 PM

Hey linc, could you give me a link to the 5mm upgraded. I cant seem to find it...

lutach · 05.16.2008, 02:25 PM

Quote:

Originally Posted by Takedown

Only one lutach, :) I know I could not beleive what he wants for it either. I plan to go pick it up this weekend. Ill let you guys know. I might run it in the metrix but im doubting it. Linc Ill take a look into that upgrade. Still sounds like a great deal!

You lucky dog you

. Great price on it. I think Kyle from Hacker Brushless sells the 5mm rotor assembly for $50 (Not sure, but I can't find the e-mail he sent me).

Takedown · 05.16.2008, 02:34 PM

I really want to know were you can get the 5mm upgrade. If I could get that I will run it on the matrix for sure.

Takedown · 05.16.2008, 02:39 PM

Found the upgrade- http://www.impaktrc.com/product_info...osCsid=d5e22ae

The rotor looks tiny for the size of the motor...

brushlessboy16 · 05.16.2008, 03:07 PM

How much do hackers run with the 5mm NIB?

lutach · 05.16.2008, 03:18 PM

Quote:

Originally Posted by Takedown

I really want to know were you can get the 5mm upgrade. If I could get that I will run it on the matrix for sure.

It is $50 + $12 for shipping (Don't know why it's so high) send Kyle an e-mail kyle@hackerbrushless.com. I don't know if the price went up or down. That price was from 2007.