REVO 3.3 conversion setup question???

I'm planning to setup my REVO 3.3 conversion to this:
Neu 1515/1Y/F Motor (5mm shaft, 110A, 2200kv)
MMM
5s
40/16 Gearing
Center diff tranny
Can someone tell if this is right combination. Thanks...

[George16]

That was the combo I was running on my converted revo except for the gearing. I had 38/17. It was pretty fast.

gearing up will also help keep the front end down

[George16]

If you don't want it to wheelie, just ziptie the front rockers.

Originally Posted by dmeylman

I'm planning to setup my REVO 3.3 conversion to this:
Neu 1515/1Y/F Motor (5mm shaft, 110A, 2200kv)
MMM
5s
40/16 Gearing
Center diff tranny
Can someone tell if this is right combination. Thanks...

if you dont already have the 3.3 a ERevo is a better balanced and a lower COG truck....you might want to consider that instead

Originally Posted by azjc

if you dont already have the 3.3 a ERevo is a better balanced and a lower COG truck....you might want to consider that instead

My setup is ready... All I need is the motor...Thanks...