 |
|
|
|
 |
|
|
 |
alternative SuperMaxx CVDS, EXT 8mm Axle |
 |
|
 |
|
(#1)
|
|
RC-Monster Stock
Offline
Posts: 27
Join Date: Mar 2010
|
alternative SuperMaxx CVDS, EXT 8mm Axle -
05.20.2010, 11:13 PM
Hi guys my supermaxx cvds 8mm axle broke
is there a alternative replacement i can use. i have ue spider 8 diffs. could you please advise. Cheers. |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Supermaxx
Offline
Posts: 2,031
Join Date: Oct 2007
Location: Earth
|
05.21.2010, 12:15 AM
Where did it break? Pictures?
Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2) |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Stock
Offline
Posts: 27
Join Date: Mar 2010
|
05.21.2010, 12:41 AM
right next to the diff cup
i have attached a pic do you have one spare also do you have a racer x shocktower as well broke both i am having really bad luck with my truck lately once i replace parts i might sell it this thing is costing me a small fortune just got a losi 8ight e buggy with a neu 1512/1.5y motor and mamba monster esc on 5s lipo and that thing is much more fun than this my supermaxx truck at a fraction of the cost. |
|
|
|
|
|
|
|
Pic's |
|
|
|
|
|
(#4)
|
|
RC-Monster Stock
Offline
Posts: 27
Join Date: Mar 2010
|
Pic's -
05.21.2010, 12:48 AM
these are the pics
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
Supermaxx
Offline
Posts: 2,031
Join Date: Oct 2007
Location: Earth
|
05.21.2010, 01:58 AM
Ouch! I have a spare set of 2 in the house but I don't know when I'm going home. I'll let you know when I get home (few weeks).
Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2) |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
UE Supermaxx Addict!
Offline
Posts: 1,006
Join Date: Feb 2009
Location: Gadsden, Alabama
|
05.21.2010, 02:14 AM
You can still buy the shock towers from the UE store, but the CVD bones are out of stock.
Complete Racer-X Knucklehead Shock Tower Kit [here] $34.99 Just the Racer-X Knucklehead Shock Tower (one) [here] $17.00 › PM ME IF YOU HAVE THE BELOW: › VBS, CVDs, GM Single-Speed, OTB, Ultramaxxed, Super6, Strobe, Sprong, CNR Brake, UE Hex, DUH Towers, Predator, Blackbird, GA Blue Screws, HCR F/R Skids & Mutant |
 |
|
|
|
|
|
U.E does not take international credit cards and paypal |
|
|
|
|
|
(#7)
|
|
RC-Monster Stock
Offline
Posts: 27
Join Date: Mar 2010
|
U.E does not take international credit cards and paypal -
05.21.2010, 05:16 AM
so i have to try to find some second hand ones who can ship to Australia.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
UE Supermaxx Addict!
Offline
Posts: 1,006
Join Date: Feb 2009
Location: Gadsden, Alabama
|
05.21.2010, 08:04 AM
SHouldn't be too hard...contact [BillyTrucks123] on eBay, I am sure he has everything you want or need!
› PM ME IF YOU HAVE THE BELOW: › VBS, CVDs, GM Single-Speed, OTB, Ultramaxxed, Super6, Strobe, Sprong, CNR Brake, UE Hex, DUH Towers, Predator, Blackbird, GA Blue Screws, HCR F/R Skids & Mutant |
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Stock
Offline
Posts: 15
Join Date: Apr 2010
Location: Maine
|
05.21.2010, 10:57 AM
You can use Jammin' X2 truggy universals in place of the UE 8mm cvds, this will also allow you to use a 17mm hex. You can get them off ebay pretty reasonable. I have both and am currently using the truggy universals. I hope that helps.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC-Monster Stock
Offline
Posts: 27
Join Date: Mar 2010
|
05.21.2010, 07:31 PM
is this the ofna Jammin x2 pro ones
i f it is i will order on ebay as i am in australia and need to make sure they are the right ones thank you |
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
RC-Monster Stock
Offline
Posts: 15
Join Date: Apr 2010
Location: Maine
|
05.21.2010, 07:50 PM
http://cgi.ebay.com/NEW-OFNA-JAMMIN-...81097909892058
These are the ones, and the seller who I bought them from, you will have to buy the hubs seperate. |
|
|
|
|
|
|
|
|
|
|
|
|
(#12)
|
|
RC-Monster Stock
Offline
Posts: 15
Join Date: Apr 2010
Location: Maine
|
05.21.2010, 07:52 PM
They work well and fit my Racer-X with setbacks perfect. Their are 2 different hubs that ofna makes that fit, I am not sure of the part #'s but one is silver/grey in color and the other ones are blue. The blue ones have a little better fit between the knuckle/bearing.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#13)
|
|
Supermaxx
Offline
Posts: 2,031
Join Date: Oct 2007
Location: Earth
|
05.22.2010, 12:02 AM
Both x1 and x2 CRT unis and hubs(gray or blue will work) will fit the racerx/EXT suspension.
Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2) |
|
|
|
|
|
|
|
|
|
|
|
|
(#14)
|
|
RC-Monster Stock
Offline
Posts: 27
Join Date: Mar 2010
|
05.23.2010, 12:15 AM
Hi George
i have 7.5 ue diffs would it still fit? |
|
|
|
|
|
|
|
|
|
|
|
|
(#15)
|
|
Supermaxx
Offline
Posts: 2,031
Join Date: Oct 2007
Location: Earth
|
05.23.2010, 02:09 AM
Yes it will. I run that setup (7.5 diffs and x1 or x2 crt universals) on my gmaxx.
Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2) |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
