Requesting shock spring measurements from 1/18 vehicles.

[simplechamp]

I have a set of the 3Racing alloy shocks for my Xray M18T, and the springs are too stiff for my liking. I have plenty of softer springs for the stock Xray shocks, but the diameter is too small to fit the wider 3Racing shocks.

I know most people here have the bigger scale vehicles, but if you do have a RC18 or Vendetta ST or Mini T or any other mini could you take some measurements? Looking for:

1. Inside diameter
2. Overall length
3. Is it the front or rear shock spring

To do things the other way, the springs for the 3Racing shocks are 10.5mm I.D., 36mm front, 46mm rear.

Any help would be greatly appreciated. With your help hopefully can find a spring that will fit.