Pay it forward - Part 2!

[Takedown]

Originally Posted by rootar

i have:

- feagio L rotor (burnt the windings)
- feagio XL rotor almost new (also burnt the windings)
- 3.5 mm connectors brand new
- 4 or 5 never used standard servos.
- GS racing TGF 2 radio and reciever brand new
-Proline 2.2 moabs on wheels (two of the wheels are junk but tires are like new if you can get them off)

just pay shipping

ill post more when i look threw all my stuff

Doesnt the rotor's demag before the windings fry?

[rootar]

hey suicideneil, are those 8t springs hard or soft? i need some harder springs for 16mm big bores and i was thinking losi had 16mm shocks right? if so pm me with shipping to the states for (4) of the shock mounts and the springs if they are hard and for 16mm shocks.

thanks

also found
-micro-t stock tires on yellow wheels
- few different reciver boxes off nitros
-9v 200ma charger/power supply
-stock mlst2 aluminum shocks
-couple sets of losi springs, i know there are 2.6, 2.9, and another rate i idunno

[notnodak]

PM sent on the stock mlst2 aluminum shocks

[notnodak]

Here's my contribution
2- plastic bodies for a scale project
http://i193.photobucket.com/albums/z...y/100_3880.jpg
http://i193.photobucket.com/albums/z...y/100_3878.jpg
Stub axles to make your E-Maxx 2WD
http://i193.photobucket.com/albums/z...y/100_3898.jpg
1.9" spike tires
http://i193.photobucket.com/albums/z...100_3895-1.jpg
4 Towerhobbies 1500 Ni-Cads
http://i193.photobucket.com/albums/z...625082154a.jpg

[rootar]

i was told they would still be good, i directly shorted the windings with both of these motors , the xl's wires rubbed the chassis till they were bare and shorted it, and the 9L i put too long of motor screws in and it was shorted across the mount.....both dumb mistakes equal HOT esc and hot motor very quick, which shut it all down but i dont think they got hot enough to demag.

i dont have more cans to test either in, but if some one has a spare can they could give them a try...

airtronics 94737 wires were repaired but it works

1.ofna am radio with reciever and crystals
2.airtronics 94737 servo

you pay usps flate rate shipping its easiest for me to ship usps but will do ups if wanted

[Arct1k]

- Ofna GTP pipe

[Takedown]

Arct1k- the radio will get sent out today. Ill let you know.

[Arct1k]

Thank you everyone for posting up - If we could try to keep the thread clean it will make it much easier to see what is available

[TexasSP]

New-1 Pair Proline Velocity 6 40 Series Wheels
New-2 Johnson 550 Sized Electric Motors (basically equal to the traxxas titans for e-maxx)
Used-Posi-trac differential for e-maxx shimmed and greased (older 3906 diff ring gear and case)
New-Stock E-maxx tires from 3906 maxx

To anyone that will pay shipping.

A few things:

-Tamiya tl-01 roller w/ tires and steering servo. Just need body, esc, motor and radio. 2 other parts cars go with it (could probably be combined to make another roller).

-crt .5 yellow dish wheels with losi bk bar tires. Tires are worn.

-Nitro parts. Fuel tanks for Muggy, Duratrax raze, and Cen Matrix. Pipe for Cen matrix.

just pay shipping

[notnodak]

Originally Posted by kona

A few things:

-Tamiya tl-01 roller w/ tires and steering servo. Just need body, esc, motor and radio. 2 other parts cars go with it (could probably be combined to make another roller).

-crt .5 yellow dish wheels with losi bk bar tires. Tires are worn.

-Nitro parts. Fuel tanks for Muggy, Duratrax raze, and Cen Matrix. Pipe for Cen matrix.

just pay shipping

I sent you a PM on the -Tamiya tl-01 roller. I'tll make a good winter project.

[Takedown]

First to contribute to another member.

Found a few more things aswell...

1) Some micro-t spares.
2) Spare 30cc pipe "bought a better tuned one and its on its way".
3) Micro-t stock charger. "needs plug".

[TexasSP]

One more thing:

1 Damaged Novak HV Brushed Controller 16.8 volt capable

Can be sent in to Novak for repair/replacement for $45.00

I will send it to anyone for the cost of shipping.