Any failures with MMM V2 and ext. BEC?

[MTBikerTim]

Why did the ccbec smoke?

well i have 2 things in mind

the first is i wanted to change the output v on the ccbec and it didnt work , i dont know if i needed a diff program from cc or ? although it was soldered to the esc. the batterys were not hooked up.........


the second thing i was thinking was that i plugged it in and left the esc. switch off , then i went outside , i live in an apartment so the ccbec was on because the batterys were hooked up and it took about 2 min. for me to put the body on and go outside to run.....??

dont know , i just hope that the servo and rx are ok , they seemed to work good the second time i tryed to run until the esc. quit??

[ptt81]

thats weird, if you managed to fry the ccbec, there is a chance you have fried the MMM bec in the exact same way, thats quite a coincidence, something must be wrong with your setup, like a short in wiring somewhere that you are not aware of may be. I've been running my V2 MMM flawlessly thru 6 packs so far with SportBec and fan wired to RX directly

well idecided to try one more thing before i send it back and it fired right up!!!!!!!!!!



it links with usb so i left the red wire in and used a rx pack and it works

i hope i will get some running with it as is for awhile , and wait to send it back

[George16]

Originally Posted by entjoles

well idecided to try one more thing before i send it back and it fired right up!!!!!!!!!!



it links with usb so i left the red wire in and used a rx pack and it works

i hope i will get some running with it as is for awhile , and wait to send it back

Good to hear it's working!!!!

Did you plug the rx pack directly into the battery port of your rx? What about the fan?

yes , i just hope it holds for awhile , i want to run my truck so bad

she will get beat but good asap