New Mamba software (beta) posted today

^^^^^^^^^^^^Yep I believe you are right. Thanks.

[brushlessboy16]

I just bricked my Mamba max trying to update the firmware, tried with and without the usb chicklet, and cannot get this esc to come back, just sits there with red and green led's.


I need this for the bash(saturday) is there any workaround

[scooterboy]

How are people getting on with the torque control as opposed to punch control? I'm still using 70% punch to reduce wheelspin but don't like the time lag effect it gives and am hesitant about trying torque control as i wont be able to adjust it at the track.

[scooterboy]

Is no one using torque control?

Originally Posted by scooterboy

Is no one using torque control?

For those of use who have the Blur version of the MMM, HPI has not allowed Castle to release the newest firmware with that feature yet.

[Arct1k]

Originally Posted by Freezebyte

For those of use who have the Blur version of the MMM, HPI has not allowed Castle to release the newest firmware with that feature yet.

I don't have a flux etc to test it on but pretty sure that would take me about 5 mins to change if you were interested...

[SpEEdyBL]

1.29 Feedback:

Firmware does not work with 6s and the Tekin 1400kv motor w/o the sensors. (haven't tried the sensors yet.) Even with torque control disabled, the motor will have no torque and spin at about one rotation per second, even at full throttle. Another person had the same problem with 4s using the Tekin 2050 also without the sensors. In my case I am able to run the 1400 with 4s with an occasional glitch (delay in throttle followed by a sudden burst of power). No issues running the 1400 on just 2s .

I've installed and reinstalled V1.29 three times with the same result. Esc is the MMP.

[bryan]

Originally Posted by SpEEdyBL

1.29 Feedback:

Firmware does not work with 6s and the Tekin 1400kv motor w/o the sensors. (haven't tried the sensors yet.) Even with torque control disabled, the motor will have no torque and spin at about one rotation per second, even at full throttle. Another person had the same problem with 4s using the Tekin 2050 also without the sensors. In my case I am able to run the 1400 with 4s with an occasional glitch (delay in throttle followed by a sudden burst of power). No issues running the 1400 on just 2s .

I've installed and reinstalled V1.29 three times with the same result. Esc is the MMP.

I had the same problem with my MMP/TEKIN 1700kv sensorless. Its smooth as silk running sensored now. On the other hand i have 2 MMM that i upgraded the firmware on have that problem also. I also have two other MMM that i didnt upgrade the firmware and they are fine.

[V0RT3X]

Is it a Castle Link registry mod or do you need the ESC to do the mod on?

[thzero]

Originally Posted by V0RT3X

Is it a Castle Link registry mod or do you need the ESC to do the mod on?

Probably just a db update.

[Arct1k]

Changed it to a 5 min update but it would be all done on your PC - I'm NOT going to post it up though unless I get an OK wink from the castle guys...

They always do good by me and I don't want to upset them or anything they have with HPI or Axial.

[suicideneil]

We've bought them enough pizza....

[Arct1k]

Haha I've sent more since then Neil :)

They'll get another batch soon when the next project is completed for sure... I owe Lee, Thomas and Patrick big time...

[thzero]

OH yeah, totally a small db mod. :)

[nitrostarter]

I may have a problem with my MMP. I swapped in the MMP in my Revo conversion, using a Tekin 2000kv on 4s. It ran beautifully with the MMM. But when I put the MMP in, it just sits there and jerks and jitters. A video below:

http://s11.photobucket.com/albums/a1...=Video0006.mp4

I've tried 3 different motors with the MMP and all do this. I've tried a couple different setting and different firmwares but no luck.

Bad esc or help?