Building A Drag / Street Ve8 Buggy Need Advice !

[The Overclocker]

ok so as the title says it all

here is what i came up with

the only thing i own so for is the * HotBodie Ve8 kit buggy & Dx3R remote control *

this is what i think i need , correct me if im wrong ! * im a nooooooobie ... but that did some home work a little ! *

HHH chassis
Savox SC-1268mg
Ofna belted street tires
Kyosho IFH002GM
60mm 98GF Spring HB
Lipo --> http://www.hobbypartz.com/98p-40c-50...-hardcase.html
icharger
Pc Psu 1000w
23-26 pinion

wires
tire glue
6.5mm quick connectors
heat shrinks
tie wraps

optional parts that would look cool

Jconcept ve8 illuzion body
flat black paint
nice aluminium wheel cap bolts
cool lights ---> http://www.rc-lights.com/products/RCL5014.html
new wing --->http://prolineracing.com/wings/high-...ce-black-wing/
cool cam --->http://www.hobbypartz.com/wosm2mispy...ProductReviews
Aluminium wheels --->http://www.nitrorcx.com/51c00-816121.html


so building a drag buggy is a little tricky ...

but i will never see a r/c closed track aka ROAR rules will never be expected

i want to be able to go from 0-100mph very fast , wile having traction + a impressive play time ... like 30min-45min full trottle

this buggy will ONLY see hot asphalt , at the drag strip or a nice street

engines setups i came up with so far

#1 choice

Mamba XL
1515 2.5d 1700kv
8s
4.2v cell - 55,440Rpm /3.7v cell Normal 48,840Rpm



#2 choice

mmm pack 2650kv
6s
4.2v cell - 66,780Rpm /3.7v cell Normal 58,830Rpm
approved by castle its self



#3 choice

Tekin Rx8 & T8
2050kv
6s
4.2v cell - 51,660Rpm /3.7v cell Normal 45,510Rpm

hoping this project could work i need some input on what setup to chose and any additional stuff

special thanks to Jeff for the help along everything * aka drknow65*

and sorry for my english