1/5th scale speed project??? - Page 5 - RC-Monster Forums

jzemaxx · 12:35 AM

What's a 2250 rated at amp draw and watts???

The Neu is rated 172amp max and I plan to run 12S...so average voltage around 44.4 volts, means about 7600+ watts!!!

TexasSP · 05.07.2008, 12:34 AM

Lutach, have you done a DM-1 conversion?

lutach · 05.07.2008, 12:40 AM

Quote:

Originally Posted by jzemaxx

Yeah, easily. I'm shooting for 100+mph setup, but will back it down to 65 or so if I do any road course racing.

The gas cars would be playing catching up. I was watching some videos of some MCDs in youtube. The gas engine seems to struggle to get it up to speed. One video, it seemed like it was going to stall.

lutach · 05.07.2008, 12:44 AM

Quote:

Originally Posted by jzemaxx

What's a 2250 rated at amp draw and watts???

The Neu is rated 172amp max and I plan to run 12S...so average voltage around 44.4 volts, means about 7600+ watts!!!

In Lehner's website they tested one up to 150A, 33V, 4600+ Watts, 93.4% Eff. http://www.lehner-motoren.com/motord...250-11.33V.xls. I wonder how they got 300A for this one http://www.lehner-motoren.com/motord...6%20HA.24V.xls.

lutach · 05.07.2008, 12:46 AM

Quote:

Originally Posted by TexasSP

Lutach, have you done a DM-1 conversion?

Not yet. I have a magazine with the DM-1 being reviewed and man the things that comes in my head are just too scary.

jzemaxx · 05.07.2008, 12:48 AM

Quote:

Originally Posted by lutach

The gas cars would be playing catching up. I was watching some videos of some MCDs in youtube. The gas engine seems to struggle to get it up to speed. One video, it seemed like it was going to stall.

Yeah I here some guys around here that have the big 1/5th cars from like MCD and such....they claim it will run 65+ mph stock....yeah right.

lutach · 05.07.2008, 12:54 AM

Quote:

Originally Posted by jzemaxx

Yeah I here some guys around here that have the big 1/5th cars from like MCD and such....they claim it will run 65+ mph stock....yeah right.

If I had a BL 1/5 scale, I would gladly take a couple days off and go there to show them what a tame BL 1/5 scale would do

.

jzemaxx · 05.07.2008, 12:57 AM

Yeah, this weekend it looks like some Nitro guys want to come out and run some top end runs. They have no idea how fast our trucks are running. All I told them is , it should be a good race.....lol. Poor guys..... Also the camera will be there!!!...hehe

lutach · 05.07.2008, 01:09 AM

Quote:

Originally Posted by jzemaxx

Yeah, this weekend it looks like some Nitro guys want to come out and run some top end runs. They have no idea how fast our trucks are running. All I told them is , it should be a good race.....lol. Poor guys..... Also the camera will be there!!!...hehe

They'll be surprised. A lot of the guys around my area drive nitro and they go on & on telling people how fast the nitros are. Well, I raced them one weekend and the excuses took place afterwards. I'm not a good racer at all. It's just the power of BL that made me look good

. I also made a few $$$$. Funny thing is, I did the same down in Florida.

jzemaxx · 05.07.2008, 01:15 AM

Yeah...I figured it will be funny to see a nitro truck just get walked hard by a big BL XTM...lol. I can't wait to get the buggy perfected....it should be fun to watch it stomp the nitro buggies coming around yappin about how fast they are....hehe.

lutach · 05.07.2008, 01:17 AM

Quote:

Originally Posted by jzemaxx

Yeah...I figured it will be funny to see a nitro truck just get walked hard by a big BL XTM...lol. I can't wait to get the buggy perfected....it should be fun to watch it stomp the nitro buggies coming around yappin about how fast they are....hehe.

I can't wait to see the video. Tell them to come in and tell us all how bad it was

. I promise we will be nice

.

jzemaxx · 05.07.2008, 01:24 AM

Lol, doubt they will be in the mood after the whoopin. More then likely you will just hear from them selling their nitros...hehe

lutach · 05.07.2008, 01:33 AM

jzemaxx · 05.07.2008, 12:44 PM

Ok guys the manufacture contacted me back this morning. They will sell us rollers if we will buy 10 minimum. For the guys that have PM'ed me if you want one let me know.

lutach · 05.07.2008, 01:03 PM

Quote:

Originally Posted by jzemaxx

Ok guys the manufacture contacted me back this morning. They will sell us rollers if we will buy 10 minimum. For the guys that have PM'ed me if you want one let me know.

They hit you with a 10 min

. Let me talk to a couple companies and I'll let you know what they tell me.