MMM v2 Success / Failure Poll

[phatmonk]

Originally Posted by JaySki

#3 just quit. No smoke... Just quit...
Running around the street.. It started to act a bit funny.. where it would be running a little forward and it would kind of act like it braked for a second. Did this a couple times and then quit.

Ironically enough.. this was the first time I set ANY of the ESC settings in Castle Link. I turned punch control to 70% and adjust the throttle curve a little less agressive, and of course the LVC to 12.8V.

Did you check you battery voltage after this happened?

[JeffEmbracedDC]

Originally Posted by JaySki

#3 just quit. No smoke... Just quit...
Running around the street.. It started to act a bit funny.. where it would be running a little forward and it would kind of act like it braked for a second. Did this a couple times and then quit.

Ironically enough.. this was the first time I set ANY of the ESC settings in Castle Link. I turned punch control to 70% and adjust the throttle curve a little less agressive, and of course the LVC to 12.8V.

This is what makes me afraid to change anything.. it's worked so far and I don't wanna eff it up :(

What's the default LVC setting?

-Jeff

[phatmonk]

I run mine with the auto lipo settings.After balancing my voltage on a 4s was 12.4 volt.I heard that the MMM V2 has a software glitch with custom lvc so I have not set a custom lvc cutoff.Go to the CC website to the download page for details.

mine just stopped working this afternoon. MMM v2 e-revo, 4S, 2770KV motor. 20T 68 spur
motor was hot, wiring warm, fan not on MMM.

going back to castle tomorrow. going to step down to a 2000 kv motor whenever i see the v2 again.

my V1 is still going strong.

[JaySki]

Originally Posted by phatmonk

Did you check you battery voltage after this happened?

Batteries had maybe 5 minutes of use.. Not even enough to warm up the motor over 100.

[RBMike]

I have 3's working V2 now, 2 with more than 1 hour on them & 1 with about 3 hours on it. Out of these, 1 fan broke (blades). I only put 1 good in the poll. No mods.

[brushlessboy16]

Originally Posted by RBMike

I have 3's working V2 now, 2 with more than 1 hour on them & 1 with about 3 hours on it. Out of these, 1 fan broke (blades). I only put 1 good in the poll. No mods.

lucky you\

[e-mike]

hoooo yes lucky you are

Do you guys think I could get 180.00 shipped for a brand new one? The box was not even opened.

[brushlessboy16]

probably not, retail is 170 or so

lol..

"Mamba Monster is here. Finally, a bulletproof Castle controller for MONSTER TRUCKS AND 1/8th Scale Conversions. Is your truck ready?"

I'll take 175.00 shipped in the US.

They are 165 shipped on the bay.

165 shipped it is..

[DRIFT_BUGGY]

My V1 got a flogging on the weekend and got grass/debris all inside it and still no problems. Fan still works (original fan)