RC-Monster Forums - Help! I need 8x15x5 bearings

Page 2 of 2

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)

- - Help! I need 8x15x5 bearings (https://www.rc-monster.com/forum/showthread.php?t=7884)

ssspconcepts

09.28.2007 12:57 AM

Quote:

Originally Posted by BrianG (Post 120315)

If you do go with the Revo knuckles, I'd try the RPM ones, or an Al setup as the stockers are a little weak from what I've found. Some have no issues, but I was popping the pillow balls out of the stockers left and right until I got RPM.

I know the RPM ones use different bearings than stock, so you might want to check into that before you buy them.

Thanks what about the aluminum Traxxas Revo knuckles? I thought they made some?

ClodMaxx

09.28.2007 01:10 AM

i just looked at the exploded view for the revo knuckles, and the 2 bearings inside each knuckle are different sizes. the outside is 6x12 and the inside is 12x18. if i'm reading that correctly (don't have a revo) you could get 8x12's for both and it should work... in theory...

All times are GMT -4. The time now is 10:24 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page