Brushless Revo V2.0
 

Ok, so I've been putting this off for who know howlong now (actually just about a month really) but I finally desided to make a thead about my Revo that i dubbed Evo 2.0. I named it 2.0 because my first version was well :020:. Honestly that was only because i couldnt wait to runt it :005:. Anywho, here she is....The current upgrades are as follows:

• 1. 1. Feigao 10xl
  2. 2. Warrior 9920
  3. 3. Ubec (not in pictures)
  4. 4. Hardcore Racing aluminum A-arms
  5. 5. titanium hingpins
  6. 6. titanium pillowballs
  7. 7. Walbash rims, Crimefighters and 23mm hubs
  8. 8. Custom one-way upfront
  9. 9. Stobe Slipper
  10. 10. Custom Wing
  11. 11. Various custom carbon fiber parts

http://img84.imageshack.us/img84/5497/picture0540cs.jpg
http://img139.imageshack.us/img139/3...ture0535fu.jpg
http://img86.imageshack.us/img86/2509/picture0435ut.jpg
http://img139.imageshack.us/img139/7...ture0426gq.jpg

Like it squee, nice job
those wheels really set it off, it needs a couple more screws in the tranny though. :010:

Yea, I forgot to put those on before I took the pictures....and before I ran it :013: Thanks! I like it to, but I think I like the g2r's better.

You did a nice job Squee.

Looks good!

sweet man, it looks really good. Good job.

I like the purple and yellow. It looks pretty good.

Thanks yall!

Very nice squee! I too, prefer the g2r:)

I honestly think it wont handle to much better than it does now. The cg is REALLY low like it is and I think that it would be a better basher however i dont really bash that hard so I think the G2R will suffice. Only thing is I will loose my oneway up front until I put a center diff in it. Is there any way to use a slider up front? i have heard that there is something that they hit or something and thats the reason for the dog bones.

Very nice truck Squee, I like the arm's.

You cant use the slider because it rubs against the bulkhead area, why do you want to put a slider up there?

Mine turns better than a nitro revo without a one way, if you tried a G2R you'll throw away the stock chassis. The batteries are flatter and the tranny sits lower, giviong you even lower C.O.G. and don't worry baout the lowered chassis, I haven't found anything I couldn't get over

Im not really worried about the the ground clearance or anything like that. I just would like to run a oneway up front for a better handling truck. With rear brakes only it is so much better in the turns and it wont flip when you brake as well as you can slide the rear end around easier for faster turns. Either way, an electric revo will out handle a nitro revo...I was just saying though, the G2R cant make it handle much better than it is now. Mostly because of a pretty low cg and the oneway.

I guess have to get you one and found out for us squee. Then you can be a compare man for the two. Ask dafni about it to. He has both.

you gunna make us a vid squee:017:

I'll try, although it will only be with a digital camera.

Hey Squee, if you spent less time answering our inane questions, you'd have more time to post some updated pictures!!!

i wished my e-revo would loook like taht

Good point :p. I will try to get some soon. No promises though, since my BPP LSP (:043:) is my main concern.

that is soooooo sick squee, and how did u make the drive shafts not rub?

Thanks! I had to cut the hump at the back about 3/4". Worth it since its cheap and they are stronger than the Maxx ones...

Yes.. a video would be very cool.... and again, very nice truck..

I did the same thing on mine. But I wish I'd have done the single speed conversion first - that likely would have allowed me to move the tranny forward a half inch or so and wouldnt have required as much grinding as I ended up doing (I think I had to take mine back about an inch).

I will eventually be able to get a video, but right now, all the electronics are on the BPP LSP. I should be able to get the LiPo's in about 2 weeks when they get back in stock...I will be able to get a video of the BPP LSP soon, hopefully.

Awesome dude... I'm gonna get a revo and convert it too.... Once I see ur vid.. :)

Get that revo aqwut, it's an incredible piece of engineering.

My thoughts exactly! I may convert my Revo3.3 eventually.....we'll see.

You'll love it.!

The rockers, they have got this cool thing. The part that holds the pivotball, it's moon shaped, so they center the ball, so the screw falls in place perfectly..

the servo-saver, the turnbuckles can be removed from the front of the truck.. very easy if one brakes. Arh, i just love that truck. Seriously thinking about ditching another savage..

that revo is an awesome design... but how tough is it..?..

Tuff as hell!

I've only broke one arm each on my G2R and 3.3

Not my choice of words, but other than that, it's a big Amen..

Well, I have desided to start Evo V3.0...I already started but need a tranny to do anymore. I think I'ma go with a 5S or 6S setup, but maybe 4S for weight...I dunno about that yet...But...It's gonna have manuel brakes with a center diff, etc. I actually haven't run V2.0 much, since battery delimas and such, as well as school, but those problems are over with. It's actually gonna be similar to BrianG's BL Revo but slightly different...

Cool! You really should start a new thread for 3.0 though...

Since you are going with manual brakes, are you going to keep the two-speed? It'll be interesting to see how you attack this one. So far, I've only seen two other people use the stock tranny; Starscream and b0gh0s (forgive me if I forgot someone).

If there was one thing I'd change on mine it's the motormount. I'd want a better one with some type of rear support. Other than that, I really like the CG since everything sits fairly low. And I assume you won't be using NiMHs.

Good luck and don't forget to take pictures along the way!

Squee, if you need a tranny, lets work out a trade of some sorts (I've got the one out of my Revo). Pm me if you're interested.

thats kinda what i was thinking lol mines better hehe jk, squee u realy stink man its youre third and i havent even finished my first and only one (cough rich cough)

Haha...Hardly. I always have to sell something to get something...It seems I'm selling more than I'm getting as well...Like my RTR LSP for a my BPP LSP that was just a roller...Anyway...Yea, I need a tranny...Anybody need a Kippster slipper or a RRP slipper :D?

ohhh i save my stuff every time lol my money is going into my team losi jrxs im racing on road and bashing off road lol lifes all good