Tekno Wing Mount for E-Maxx
 

What i wanted to find out is that If, i used the t-maxx 3.3 body mounts especially the rear would it fit onto a revo Tekno Wing Mount?

looks like it should bolt perfectly on to it. BUT, is the t-maxx 3.3 body mount the same length as the revo body mount? (meaning the top)
same length as revo???????

Length wouldn't be the concern, but the width of the body post...

thats what i meant, sorry squee my fault.

i'll look into it at traxxas maby anyone there might know.
so your saying that your not sure it will work.

I just thought of a way to find out...Check the Traxxas exploded views to see if there the same part number for the Revo and for the Maxx.

Edit: Well I just checked them and no, there not the same. Its quite obvious actually... But I don't think it will work. The Maxx post appear to be farther apart. My choice would be the FLM towers. They have 20 shock positions and can accept several different mounts I believe.

all i really know of is tekno revo wing mount, not sure of any other kinds.

Does any one have a view of the revo wing mount?

yea i got it

Well I'm about 83% sure it won't work, but I wouldn't get that version anyway. The new one they came out with is adjustable.

The new 3.3 towers and body post uses the square post. I don't know how much different they are.

leroy they are the same im very sure about that.

Does any one have a link to the wing mount?

http://www.teknorc.com/product_info....48c87979005e0b

here it is the new tekno revo wing mount

These are actually in stock - working on getting them listed in the store, along with the Neu motors, revo center diff and rear barke kits and some more new items.

I have the old Tekno Revo wing mount so I took a few measurements. Center to center on the mounting holes is 70mm wide and 25mm high. That is the same width (70mm) as the center shock mounting holes on the stock e-maxx shock towers to give you an idea.

so this actually might fit for the maxx. but the old one anyone have the new one and took any measurements?

The new one and old one are gonna be the same.......

whoa looks like i've been awnserd, squee what would you do keep stock towers or get the flm and use the mugen? anyone else that sugests it would be nice.:)

I would still go for the FLM. 20 shock mounting positions....

Will it fit any shock tower in the market?

I might get the Nova Low Profile shock tower in the future.

I got both (Tmaxx 3.3 towers and revo wing kit) and i saw a couple things that might be a problem, nothing major but still worth noting.

The width is different (maxx is wider by about a half inch), so you need the proper spacers, those hex shaped things might be available in different lengths at the hardware store.

If you find the right length spacers the outer shock mount hloe in the rear of the tower is in the way, so some creative grinding is needed and may mess with some setups

or u guys coud just get the tekno mount for the maxxs

Don't think they make one, if so got a link

edit: Never mind found it http://www.teknorc.com/product_info....roducts_id=332

I actually like that wing mount, but it sucks for Towered VBS users :012: . Can't seem to find a DD mount anymore.

DD mount?