CRT.5 Body Posts
 

I was lookign for some more body posts for my CRT.5 and all I could find is this?

http://www3.towerhobbies.com/cgi-bin...I=OFNC0676&P=7

Is there another option besides buying what on the link?

I would get this one:

http://www.amainhobbies.com/product_...ducts_id/13447

It is the direct part kit for the CRT.5. Includes two front mount and two rear mounts.

Also - someone recommended to me mounting the front mounts in reverse (ie: screws in from the front) and even though I had to cut two new holes in the body and the mounting isn't totally perfect I have yet to bust a body post for a while.

So your after aluminum?

I would buy some aluminum ones.. they would last longes as I am a stellar driver.. I mean wrecker! Do they make any?

thats the kit I was looking for..

Thanks for the Tip..

Just use a set of stampde / rustler mounts - Cut them off and drill a hole through - Cheap as chips and last a good deal longer

I busted the tops off mine fast (flips and lid slides on pavement) and as I have the ext chassis, none of the parts for the ext version can be found.

So.. I cut the stumps off flat and drilled and tapped a 3mm hole thru the post and used 3mm cap head bolts instead. Tons of wrecks and no breaks.

You can see it here if you squint:
http://i7.photobucket.com/albums/y25...4/IMG_5342.jpg

Or how about these. Got tired of replacing the plastic mounts when they broke or got ground off.

http://i142.photobucket.com/albums/r...3/01010048.jpg

http://i142.photobucket.com/albums/r...01010049-1.jpg