mini-t
 

hi, i own a mini-t but plan to put competion x package on it.
i'm confused because i will need a new receiver but mini-t got this weird 4 wire connection to the servo. could i cut the black wire off and just plug in the other three to a generic receiver and that will work?

You need a new servo, the stock one doesn't last very long anyway. I would strongly recommend the GWS Pico std servo, the standard servo saver works with it, all you need is a bit of servo tape between the servo and chassis to hold it down.

If Mike doesn't stock any micro ones, I got my servo from www.b-p-p.com .

thanks! i will get that servo in a few days

I bet Mike can get you this servo! Just ask him, he ships stuff superfast.

Are you fellas sure you can run the stock esc/rx unit with the 3-wire servo's tho? I had a feeling the stock unit would only allow the stock losi servo to work with it... unless you mod the 3-wire to a 4-wire....

just what i had always thought anyways -lol-

Last time i checked you needed another receiver to be able to run the mamba, and with that a new steering servo.


Mike carries CastleCreations (mamba) he can get you the goodies needed! (servo/reciever, 3racing mini-t parts) just shoot him an email

I love the T on a 3S lipoly.. it really is uncontrolable fast.

oops - didn't read this very well did i -lol-