Will savage slipper/spur fit?
 

Does anyone know of the savage 51t slipper/spur fit on the gorillamaxx g1 tranny. I know people are using the ofna spur, but will this work as well? Here is a pic of what i would like to use if it would work.

If you are looking for a Mod 1 spur and slipper as an alternative to the Strobe, here's my suggestion:

RRP slipper:
http://www3.towerhobbies.com/cgi-bin...?&I=LXBJC8&P=7

MGT spur. Tower says it's 32 but it's actually a Mod1. I have one in my parts bin.
http://www3.towerhobbies.com/cgi-bin...?&I=LXFUA5&P=7

I'm using a Savage X spur (the ones with slipper plates on both sides) together with the sliper discs from the RRP slipper kit which i filed completely flat. Im using another stock slpper spring as the bushing.

Works pretty good and looks like this :)

http://img402.imageshack.us/img402/7...seuptn0.th.jpg


The usual savage spurs work too, but you first have to put a stock slipper pad (or a smilar shim) before the RRP Pad (and then the spur) to make it work. But sadly the only option of slip adjustment with this method is "air tight"...

Thanks guys for the info...