my muggy 8s
 

muggy monster!!
big pig! fast! I like this.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/VUi41p4yUsE&hl=ja&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/VUi41p4yUsE&hl=ja&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/627VgAtyhc0&hl=ja&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/627VgAtyhc0&hl=ja&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

mgm 16024
1521 1900kv
11/46 (esc hot! 10/46 I am going to change it)
8s 4000

nice, you may need a bigger esc with that motor.

Wow, that's a huge amt of power. Do you know how many amps you are pulling? Perhaps that's a bit much motor (high kv) if you are getting it that controller hot. The MGMs are very tough. I can tell you if you tried to make that much power with 4,5, or 6S you would have a flaming wreckage by now. You may need to go higher voltage even if the temps are not controllable (or gear down to lose power)

Thats kinda what I was thinking of doing w/ the muggy roller I have, as well as the MGM 9932 esc I have as well. Perhaps on 10s and lower kvs tho.

Nice truck tho. About 5000x faster than the nitro w/ the 427 engine in it.

Nice. You need to get a lower kv motor though.

my 6s muggy move!
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/gBoJyz-Svis&hl=ja&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/gBoJyz-Svis&hl=ja&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>


8s may be surely bad in ESC.
A motor of low KV that I expect it.
There is not a fund now because I bought RC8 and a TEKNO set.
I can be satisfied very much even for 6s, but cannot come back if after all I feel 8s.
OK, I will do it how…Because a price is too high, does NEU have a recommended motor?
I wait for Medusa Products Afterburner 80size.

6s looks like fun, more controllable.

What are the temps? Are you getting shut downs?

Getting a 80mm Medusa will not help. Its basically the same motor as a 1521.
You are spinning that motor very very fast. Beyond what is recommended. Lots of power, but lots of heat as a result as well. How many amps are you pulling, and what are the temps of the motor and esc?

Getting a lower kv motor and gearing up may be a better way to go than gearing down that setup.

MAX amps 370A of ESC.
Is it continuation ??
The power does not fall. slow down.
MAX TEMP 100 ℃full throttle around 4 minutes.
Motor 65 ℃-70℃
I change pinion 10T of it first of all.
And I change it because the tire bat land is heavy.

new vid!
is 6s...
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Uc-Jr8MXciY&hl=ja&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Uc-Jr8MXciY&hl=ja&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/UOWXBdgG3_I&hl=ja&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/UOWXBdgG3_I&hl=ja&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/WZlam8x-CZ8&hl=ja&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/WZlam8x-CZ8&hl=ja&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

How mutch trottle did you use in your vids ? Your muggy seems kind of slow ? But still cool :)

wow that thing is FAST even on 6s...8s is just over the top.

6s 70%～100％ trottle
8s 50％～70％ trottle
6s　very good!
8s When stress piles up!

Looks like the sweet spot is 6s.