2 questions about the V2 RCM diffs...
 

1. Can I use the stock revo axles (6mm?) with the outdrives on the diff (also 6mm? or 8mm?)?

2. If I use a dogbone center drive shaft, can I use a 6mm drive cup on the tranny and an 8mm drive cup on the diff at the same time? Will the dogbone fit into both drive cups?

Thanks.

1) yes

2) yes

I run the revo CVDs for the arms and the gorillamaxx dogbones for the centre

Sorry to hijack the tread but Arct1k how are the traxxas cvds holding up? Do they wear good?