emaxx wheelie from stadstill?
 

I heard a stock emaxx will wheelie from stop. My new emaxx has full cvd's and a 64 tooth spur gear. now although i don't think i've gunned full from a stopped posistion ( trying to break it in somewhat) i don't see the front wheels wanting to lift off the ground (on pavement). is this because i put in the 64 tooth spur?. Thanks.

mine did with a 64. yours should as well

I tightened the slipper down all the way and turned it a 1/4 turn back per the insturctions. is that too much? should i run this thing with the slipper full tight?

what kind of batteries? That may be a problem. I seen a stock emaxx back flip with good batteries. I seen them not do much with cheapos.

when mine was stock it wheelied and i to have seen other people flip them over backwards. it must be the batteries

Mine all stock on 14 cells wheelied like no tomorrow.

Mine wheelied on 12 cells too. Still does! :L:

I didn't loosen any, i tightened as tight as i could and left it

Same but not too tight! I have just orderd a replacement slipper spring from making that mistake. :o

You need good cells, that's what Country is saying as well.