RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Savage Flux - ESC Upgrade options (https://www.rc-monster.com/forum/showthread.php?t=23477)

fastbaja5b 09.11.2009 12:02 AM

Savage Flux - ESC Upgrade options
 
Hey guys,. looking to upgrade my Savage Flux esc.

Would one of these do?

http://www.formularc.com.au/index.ph...chk=1&Itemid=4

Bad Karma 09.11.2009 12:13 AM

I'd keep the stock ESC since it is just a rebranded Mamba Monster.

If you want overkill I have an MGM 28025 Z Series for sale, PM me if your interested.

_paralyzed_ 09.11.2009 02:28 AM

what you linked to is no better than what you have. as stated above a "savage flux" esc is just a rebadged Castle Creations Monster Mamba Max.

what do you want? higher cell count? more reliability?(that's a toss up, every company has failures and there are no hard facts about "most reliable") higher current capabilities?

for 6s operation you really can't beat what you've got.

fastbaja5b 09.11.2009 02:31 AM

I'm actually running 5s2p A123 at the moment.

Main thing I want is something more reliable and if possible smaller footprint.

Mystro 09.11.2009 02:39 AM

More reliable? Have you already broken your esc?

big greg 09.11.2009 03:48 AM

ya i dont get it? the MMM has came along quite well, the way we treat our cars you cant expect a little box with 3+ HP running through it to last forever. at least i dont

_paralyzed_ 09.11.2009 03:57 AM

Quote:

Originally Posted by fastbaja5b (Post 319911)
I'm actually running 5s2p A123 at the moment.

Main thing I want is something more reliable and if possible smaller footprint.

The only reason you hear more about MMM failures is because there are more in the world. There are no hard facts or statistics about reliability, and I doubt the various manufacturers will ever divulge them.

I believe the tekin may have a slightly smaller footprint, but it's negligible. If a tiny bit of room matters, switch to the tekin. It's no more or less reliable.

Go lipo, that'll save a ton of room and weight.

You've got the best already:intello:

TexasSP 09.11.2009 10:31 PM

Good luck getting the Quark serviced if something goes bad too. They are nice controllers, but the old 125's were notorious for heat problems and failures too. Quark as of late has been very unresponsive in the service area.

The tekin is the only other controller I would consider, and like others have said, it is no more or less reliable than the MMM.

MGM's are solid, I liked mine. But the start up routine, firmware, and update software is nowhere near what the MMM and/or Tekin offer.

brushlessboy16 09.11.2009 11:41 PM

Look into the tekin rx8

http://i152.photobucket.com/albums/s...0911091542.jpg

Mystro 09.12.2009 12:18 AM

Also, the MMM has everything the RX8 has (not sensored though)like castle link plus it's cheaper!


All times are GMT -4. The time now is 07:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.