RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   Your first BL? (https://www.rc-monster.com/forum/showthread.php?t=24088)

BL_RV0 10.17.2009 04:15 PM

Your first BL?
 
What kind of car/truck and what system? What batteries?

Mine was a rustler xl5 with a sidewinder 5700 system on 2s impulse 3200 lipo. Such a fun truck. Needless to say it got a lot of use.

JoFreak 10.17.2009 04:22 PM

Mine was a Tamiya Gravelhound DF02 buggy with a kontronik twist55 (5500kV) and a kontronik jazz car 70 ESC.
Batteries were 6S NiMH 3300mAh pushed and matched by hopf.
Were good batteries back then, but still only ~10mins of runtime.
And the Tamiya drivetrain couldn't cope with that kind of power for too long.
I'm still thinking of getting a full metal drivetrain von tobee craft and put the kontronik system back into that buggy after I got it repaired (magic smoke went out the ESC a while ago), but this time with 2S lipos.
Would be fun to shock some of the "nitro is so superior"-guys with my cheapo elo-tamiya:lol:

Bondonutz 10.17.2009 04:25 PM

5-6 yrs ago I bought the newly released Associated 18MT with the first Castle Mamba25 and my first Lipo was a ThunderPower 2100 2s that cost me $140.00 !!! OUCH
The truck was pretty cool for what it was, diffs blew constantly but I had fun w/it.

bdebde 10.17.2009 04:39 PM

Put a Mamba Max 7700 system in my old HPI RS4 and I was hooked!

cornolio 10.17.2009 04:45 PM

yokomo CGM with novak ss system.
I was the first one who raced with bl at our local track

sjcrss 10.17.2009 04:56 PM

Mine was a traxxas emaxx, with a
1) Jeti 80amp controller, and a 30/3 phaser motor, I ran a dual setup...... didn't like it, went back to a brushed system
2) Bk 1895 micro w/ 1920/7 lehner
3) BK 2095 micro w/ the same 1920/7
4)BK 2095 micro w/7xl
5) Quark 125b w/7xl
This is in my EREVO
6) Quark 125b w/ Castle Neu 2200 KV

lutach 10.17.2009 04:57 PM

Custom Works Dominator and a RC10 Stadium Truck with Team Pit Stop's Oval Conversion and both with a Aveox sensored ESCs and motors.

shaunjohnson 10.17.2009 06:28 PM

XL5 pede- rebuilt to VXL spec and a VXL system.
i figured a VXL system would be better as it was designed for the car :lol:

Slowkrawl 10.17.2009 07:29 PM

VXL system on 3s lipo in my slash, still just a nooob to BL.

brushlessboy16 10.17.2009 07:32 PM

Duratrax raze

Turnigy 50-55B 600kv outrunner

5s zippy 4000mah lipo ($50)

Mamba max

Thing was sick

http://i152.photobucket.com/albums/s...10/Raze013.jpg
http://i152.photobucket.com/albums/s...0/100_0956.jpg
http://i152.photobucket.com/albums/s...0/100_0953.jpg
http://i152.photobucket.com/albums/s...0/100_0968.jpg

Unsullied_Spy 10.17.2009 07:33 PM

I had the original Traxxas Rustler with the 20T Stinger motor and Mechanical Speed Control and went straight to the MM 5700. With the same gearing and batteries (GP3300 6 cell pack) I picked up 10-20 MPH, doubled my run times, and had seemingly unlimited torque. That was enough to have me hooked!

junkman 10.17.2009 07:34 PM

mini-t, mamba 25/8000, 3s, Nothing but brushless since!

nitrostarter 10.17.2009 07:49 PM

Original Emaxx that became heavily modded.... Running a 9L and BK18120 on 12, 14, and 16 NiMh cells. Them moved to a 7XL Wanderer.

http://i11.photobucket.com/albums/a1...er/BLsetup.jpg
http://i11.photobucket.com/albums/a1...starter/BL.jpg
http://i11.photobucket.com/albums/a1...r/P1010020.jpg
http://i11.photobucket.com/albums/a1...r/100_1209.jpg

crazyjr 10.17.2009 08:03 PM

Novak hv 4400 w/maxamps 4.4k Nimh

snellemin 10.17.2009 08:23 PM

Mamba Max + 5700 in a Rustler, with A123's.


All times are GMT -4. The time now is 10:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.