RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   First Run 8XL 14 Cell (https://www.rc-monster.com/forum/showthread.php?t=2957)

bigabike 04.26.2006 01:03 AM

First Run 8XL 14 Cell
 
http://www.rustyonline.net/4.wmv

56k Beware!

This is unedited and the setup isn't perfect yet, but as far as first test runs go, I am very happy!

Thanks to Mike and all of the forum members for the help!

I burned a 9920 and 12020 with the original 8xl. It never ran like this!

It has taken a long time but I am happy now!:027:

Nick 04.26.2006 03:28 AM

Looking good. Nice servo you have there to. :)

What CVDs are you running, and arms? Seems to be high up!

bigabike 04.26.2006 03:37 AM

Quote:

Originally Posted by Nick
Looking good. Nice servo you have there to. :)

What CVDs are you running, and arms? Seems to be high up!

Thanks!

MIP CVDs
UE Widetrack

Jasper 04.26.2006 07:56 AM

The first run is looking good! Just be carefull with the brakes :017:

What cells are you running? And what was your runtime?

bigabike 04.26.2006 11:17 AM

Quote:

Originally Posted by Jasper
The first run is looking good! Just be carefull with the brakes :017:

What cells are you running? And what was your runtime?

IB 3800 7 cell SxS From Mike.
Don't know about run time yet. That vid is the only run so far.

crazyjr 04.26.2006 11:29 AM

Looks like you need to get a new slipper, like a Robinson maybe

bigabike 04.26.2006 11:32 AM

Quote:

Originally Posted by crazyjr
Looks like you need to get a new slipper, like a Robinson maybe

Yep. I have a Strobe. Hopefully I'll have time to install today.

Serum 04.26.2006 04:33 PM

Hi Biga!

Looking good! nice and smooth. (except for the braking part perhaps.. :p )

Just out of curiosity;

why do you use 8 firm springs? really no need for it, you can do with 4 of them, and the coil-overs. so what's the use of having 8 of them? have you got the coil-overs?

Batfish 04.26.2006 04:52 PM

Nice truck! :003:

Sylvester 04.26.2006 04:57 PM

Nice truck! Ill race yah!

neweuser 04.26.2006 05:03 PM

Not to hijack here, but does robinson carry a mod1 51 by any chance, and is the robinson strong enough to hold the torq?

coolhandcountry 04.26.2006 06:18 PM

Robinson does make a mod a pitch gears. It fits a mgt but will fit a maxx as well. They are metal though. I have not noticed a plast one out. The strobe is a better set up IMO.

That is a nice truck. Looks to run nice. I see you try to be smooth with the trigger. Hard to drive with front tires off ground.

Rtsbasic 04.26.2006 08:23 PM

Nice truck, whats your shock setup on it? Hoping i'll get similar stability with mine. I have the Integy shocks with 4 firm UE springs and 4 soft UE, with heavy oil.

You need to get that Strobe on there! Its a nice price of kit. I liked the Robinson Racing slipper as well, I used one till I got a Strobe.

bigabike 04.26.2006 08:40 PM

Thanks guys.

I am running 8 powerstrokes w/ 70 wt front and stock oil in the rear. I am using the extra Firm Spring Kit on all 8.

I am planning on bashing, so weight is not a concern. I thought I would try with 8 and run some sag in the rear (negative travel). We'll see over time as I get brave and start jumping. @ $29/pair I thought it would be a worthwhile experiment. So far so good. You also must admit it looks sweet!! :027:

I hope this answers the questions.

Thanks again!

Sylvester 04.26.2006 10:30 PM

Everythings great, im just happy youve got a "non-smokified" system:)


All times are GMT -4. The time now is 04:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.