RC-Monster Forums - View Single Post

bdebde · 04.25.2007, 11:02 AM

***RC***: Have not run it too much for top speed, gotta be about 45 i think.

AAngel: not sure what you mean about the bearing standoff? I did have a problem witth the screw heads not quite being flush with the spur. Ended up putting a diff shim on the outside of the rear bearing to get the screw heads away from the diff mount.
I am running 14/46 gearing right now, may go down to 12. Still gotta see what run times are like. I may get an 8XL as well just to give it try. Never hurts to have a extra motor, or different ones for different tracks

	(#8)
bdebde That's All Folks! Offline Posts: 2,359 Join Date: Dec 2006 Location: in a VAN down by the RIVER	04.25.2007, 11:02 AM *RC*: Have not run it too much for top speed, gotta be about 45 i think. AAngel: not sure what you mean about the bearing standoff? I did have a problem witth the screw heads not quite being flush with the spur. Ended up putting a diff shim on the outside of the rear bearing to get the screw heads away from the diff mount. I am running 14/46 gearing right now, may go down to 12. Still gotta see what run times are like. I may get an 8XL as well just to give it try. Never hurts to have a extra motor, or different ones for different tracks Ve8 - MMM, Neu 1509/2.5y, 6s D8T - MMM, Neu 1515/2.5D, 6s Muggy - MMM, CC 1520/1Y, 6s SC10 4X4